Dixon Aficio 1515 사용자 설명서

Troubleshooting

22

❒ If the problem cannot be solved, contact your sales or service representative.

It takes too much 
time to resume 
printing.

The data is so large or complex that it takes time to process. If the Data In 
indicator is blinking, data is being processed. Simply wait until printing 
resumes.

The machine was in Energy Saver mode. To resume from Energy Saver 
mode, it has to warm up, and this takes time. See General Settings Guide.

Paper is not fed 
from the selected 
tray.

When you are using a Windows operating system, printer driver settings 
override those set using the control panel. Set the desired input tray using 
the printer driver.

See the printer driver Help.

Optional compo-
nents connected to 
the machine are 
not recognized 
when using Win-
dows 95/98/Me, 
Windows 
2000/XP, and 
Windows NT 4.0.

You have to configure the option setup in printer properties when bidirec-
tional transmission is not enabled.

See the printer driver Help.

Images are print-
ed in the wrong 
orientation.

The feed orientation you selected and the feed orientation selected in the 
printer driver's option setup might not be the same. Set the machine's feed 
orientation and the printer driver's feed orientation accordingly.

See the printer driver Help.

The printed image 
is different from 
the image on the 
computer's dis-
play.

With certain functions, such as enlargement and reduction, image layout 
might be different to that on the computer display.

You might have selected to replace True Type fonts with machine fonts in 
the printing process.

To print an image similar to that of the computer display, make settings to 
print True Type fonts as an image.

See the printer driver Help.

No transmission 
when using 1394 
interface connec-
tion

Check using the following procedure:

A

Confirm the IEEE 1394 interface cable is connected securely.

B

Restart the computer.
If the error occurs even after executing the above operation, proceed to 
the following steps.

C

Unplug the IEEE 1394 interface cable connected to the computer.

D

Run the utility tool for the IEEE 1394 interface board, which is stored in 
the following path on the CD-ROM “Printer Drivers and Utilities”:
\UTILITY\1394\

For more information about using the utility tool for IEEE 1394, see 
the README file in the same directory on the CD-ROM.

E

Restart the computer.