Dixon Aficio 1515 사용자 설명서

Troubleshooting

68

This table lists some common problems and their solutions. 

Image background appears 
dirty when received at the 
other end. Images from the 
back page appear.

Adjust scan density. 

p.25 “Image Density (Con-
trast)”

Printed or sent image contains 
spots.

The ADF or exposure glass is 
dirty. Clean them. 

Make sure that ink or correc-
tion fluid is dry before placing 
originals.

“Maintaining Your Machine”, 
Copy Reference

Received image is too light. 

Request the sender to increase  
image density. 

---

When using moist, rough, or 
processed paper, the printed 
image may be partly invisible. 
Only use recommended pa-
per. 

“Copy Paper”, General Set-
tings Guide

When 

D appears on the dis-

play, toner is beginning to run 
out. Replace the toner car-
tridge soon.

“

DAdding Toner”, Copy Ref-

The machine failed to print re-
ceived fax messages.

If this happened when the re-
ceive file indicator was lit, a 
problem such as run out of pa-
per or toner might disable 
printing.

p.34 “Substitute Reception”, 
Facsimile Reference <Advanced 
Features> 

When 

B is lit, load paper into 

the tray.

"Loading Paper", Copy Refer-
ence

Message appears blank at the 
other end. 

The original was placed up-
side down. Place it properly.

p.11 “Placing Originals”

Both transmission and receiv-
ing are impossible.

Make sure that the modular 
cord is correctly connected.

p.99 “Connecting the Machine 
to a Telephone Line and Tele-
phone”, Facsimile Reference 
<Advanced Features> 

The terminal adaptor setting 
is incorrect. Check the setting.

---

Transmission is possible, 
though receiving is impossi-
ble.

The optional terminal adaptor 
setting is incorrect. Check the 
setting.

---

Receiving is possible, though 
transmission is impossible.

The optional terminal adaptor 
setting is incorrect. Check the 
setting.

---

StellaC2-GBcombine-F_FM_ZF.book  Page 68  Wednesday, November 26, 2003  5:04 PM