DirecTV DTV-MD0-0058 사용자 설명서

다운로드
페이지 49
   
DIRECTV Set-top box information for the installer
 
DIRECTV Proprietary 
 
November 17, 2005 
Version 1.1.a 
Page 6 of 49 
DTV-MD-0058 
1 Introduction 
1.1 Disclaimer 
DIRECTV makes no representations or warranties, express or implied, that use of the 
technologies described in this specification will not infringe patents, copyrights, or other 
intellectual property rights of third parties. Nothing in this specification should be construed as 
granting permission to use any of the technologies described. Anyone planning to make use of 
technology covered by the intellectual property rights of others should first obtain permission 
from the holder(s) of the rights. This specification is subject to change without notice. DIRECTV 
does not accept any responsibility whatsoever for any damages or liability, direct or 
consequential, which may result from use of this specification or any related discussions.  These 
specifications are provided “as is” and the user of these specifications assumes any and all risks 
associated with the use of these specifications.  DIRECTV expressly disclaims any and all 
representations or warranties, express or implied, regarding the specifications, including without 
limitation any warranty as to merchantability, fitness for a particular purpose, non-interruption of 
use, or non-infringement.   
1.2 Scope 
This document provides information on the DIRECTV Set-top box data port, front panel, and 
remote control commands as an aid for installers, and auxiliary devices.  This document is 
relevant to set-top box (STB) models D10-100, D10-200, D10-300, D11, and H10.  Other 
models are not supported by this document. 
1.3 Feedback 
Email feedback to 
custominstallsupport@directv.com