Dimplex DFO2307 사용자 설명서
MAINTENANCE
WARNING
Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire,
electric shock or damage to persons.
COVERING YOUR DIMPLEX OUTDOOR FIREPLACE
When not in use, cover your Dimplex outdoor fireplace with a weather resistant covering. The
cover will help protect your fireplace from detrimental effects of weather and enviromental
pollutions.
GLASS CLEANING
The glass is cleaned in the factory during the assembly operation. During shipment,
installation, handling, etc., the glass may collect dust particles; these can be removed by
dusting lightly with a clean dry cloth.
The glass is cleaned in the factory during the assembly operation. During shipment,
installation, handling, etc., the glass may collect dust particles; these can be removed by
dusting lightly with a clean dry cloth.
To remove fingerprints or other marks, the glass can be cleaned with a damp cloth. To
prevent scratching, do not use abrasive cleaners or spray liquids on the glass surface.
SEASONAL CLEANING
To clean the glass or remove debris from inside unit.
NOTE: Gloves are required as edges may be sharp.
prevent scratching, do not use abrasive cleaners or spray liquids on the glass surface.
SEASONAL CLEANING
To clean the glass or remove debris from inside unit.
NOTE: Gloves are required as edges may be sharp.
1. Remove top from mantel.
2. Lift firebox out of mantel.
3. Lay firebox on it’s back.
4. Remove screws from the left and right side of the front glass lower support. (Fig 4)
5. Insert the tip of a slot screwdriver between the glass edge on either the left or right side
2. Lift firebox out of mantel.
3. Lay firebox on it’s back.
4. Remove screws from the left and right side of the front glass lower support. (Fig 4)
5. Insert the tip of a slot screwdriver between the glass edge on either the left or right side
trim.
6. Using the screwdriver as a lever apply presure in a downward motion, forcing the
edge of the glass up.
5
Figure 4