Dimension One Spas AQUATIC FITNESS SYSTEM 2003 사용자 설명서

다운로드
페이지 44
Aquatic Fitness System 
2003 Owner’s Manual 
 
 
Symptom (Cont) 
Problem 
Corrective Action 
 
High temperature condition: 
Do not enter the spa water.
 The water 
temperature is above acceptable limits. 
Water temperature has reached 110°F 
(43.3°C.)   The air blower and low speed 
pump are activated to assist in lowering 
water temperature.     
 
No action required unless the water 
temperature fails to return to acceptable 
levels – in which case, call your dealer for 
service.
 
 
High limit condition: 
Do not enter the spa water.
  
The water temperature has reached 118°F 
(47.8°C.)  The entire system is disabled.
 
Call your dealer for service. 
 
AquaFit™Dual Temp (Spa-Side) 
Symptom 
Problem 
Corrective Action 
 
 
“OH” on  LED Digital Display 
Window 
 
High Temperature Condition: 
Do not enter spa water.
 The water 
temperature is above acceptable limits. 
The water temperature has reached 
110°F (43.3°C.).  The system will shut 
down.  
 
 
1. 
Remove the cover and allow the 
water to cool.  
2. 
Reset the power to the spa by 
resetting the GFCI breaker.  
 
No further action is required unless the 
water temperature fails to return to 
acceptable levels – in which case, call 
your dealer for service. 
 
 
 
3 Flashing Lights AND  
“OH” on  LED Digital Display 
Window 
 
High Limit Condition: 
Do not enter spa water.
 The water 
temperature is above acceptable limits. 
The water temperature has reached 
118°F (47.8°C.).  The system will shut 
down.  
 
 
 
Call your dealer for service. 
 
3 Flashing Lights 
 
System Error: 
 
1. 
Check the water level 
2. 
Clean the filters.  
3. 
If the problem persists, reset the 
power to the spa by resetting the 
GFCI breaker.  
 
 
 
If the error is not resolved after 
resetting the spa, call your dealer for 
service.  
 
 
37