Disney Time Clock agent-p snooze-inator alarm clock 전단

PF-315 IB - back   Printing color: Black   
June 25, 2012
size:  355W x 240H mm

This unit operates on 3 AA batteries. If the sound 

becomes weak or distorted or the Low Battery icon 

appears on the display, it’s time to replace the       

batteries.

ATTENTION: Batteries should only be installed by an 
adult.

  Use a Phillips screwdriver to open the battery 

compartment door located on the back of the unit.

  Install 3 AA size batteries, making sure that the + 

and – polarities match the diagram printed inside 
the battery compartment.

  Close the battery compartment door and tighten 

the battery door screw. Do not over-tighten.

•   We recommend the use of alkaline batteries for longer 

life.

•  Do not mix old and new batteries.
•  Do not mix alkaline, standard (carbon-zinc) or 

rechargeable (nickel-cadmium) batteries.

•   Batteries are to be inserted with correct polarity.
•   Remove exhausted batteries from the unit.
• 

 Do not attempt to recharge non-rechargeable 

batteries.

•   Remove the rechargeable batteries from the unit 

before charging.

•   The supply terminals are not to be short-circuited.
•   Batteries should be removed if the item will not be 

used for an extended period of time, such as a month 
or longer, to prevent battery leakage or damage.

•   Rechargeable batteries should only be charged under 

adult supervision.

•  Only batteries of the same or equivalent type as 

recommended are to be used.

1.  Remove the product and all packing materials from 

the carton.

2.  It is a good idea to save the packing materials in case 

the unit needs to be returned for service. If you do 
dispose of the packing materials, please do so 
properly.

3.  Remove the demo tab from the battery compartment 

on the back of the unit and the clear protective film 
from the clock display.

4.  Insert the tail stand in the back of the unit for proper   

stability

5.  The unit should be placed on a level surface, away 

from direct sunlight, and away from the sources of 
excess dust, dirt, heat, water, moisture, vibration, and 
strong magnetic fields.

6.  Protect your furniture when placing the unit on natural 

wood or wood with a lacquered or coated finish. A 
cloth or other protective material should be placed 
between the unit and the furniture. 

If the unit becomes locked up or frozen, insert a paper 
clip or similar into the Reset Port on the back of the unit 
and press in. Doing so will reset the music chip.

1.  Press and hold the Time Set Button until the display 

flashes.

2. Press 

the 

FWD or REV Button to adjust the clock to 

the current time (hold for rapid adjustment). Remember 
to set the correct AM or PM time. A PM indicator appears 
at the bottom left of the display; there is no AM indicator.

3. Press the Time Set Button (or no button within 10 

seconds) to confirm time and exit time setting mode. 

The alarm on this unit features sound effects, flashing lights 
and speech. It has a gradual alarm which starts off quiet and 
gets louder.
To view the current set alarm time, press the Alarm 
Set/Reset Button. You can toggle the alarm ON or OFF by 
sliding the Alarm On/Off Switch. An alarm icon will appear 
in the upper left of the display, indicating the alarm is armed. 

1.  Press and hold the Alarm Set/Reset Button until the 

display flashes.

2. Press 

the 

FWD or REV Button to adjust the clock to 

the desired alarm time (hold for rapid adjustment). 
Remember to set the correct AM or PM alarm time. A 
PM indicator appears in the display; there is no AM 
indicator.

3.    Press the Alarm Set/Reset Button (or no button within 

10 seconds) to confirm alarm setting time and exit alarm 
setting mode. 

4.  When the alarm is sounding, press the Alarm Set/Reset 

Button to stop the alarm sounding and reset it to come 
on the next day at the same time.

5. Press the Snooze Button to temporarily silence the 

alarm for about 9 minutes. After this, the alarm will sound 
again. You can press the Snooze Button several times 
during the duration of the alarm (about an hour).

Rev Button

Fwd Button

1.  Connect one end of a standard 3.5mm stereo audio  
 

cable (not included) to the headphone or line-out jack  

 

of your audio device and plug the other end into the  

 

MP3 Line-in Jack on the back of the unit.

2. Press 

the 

MP3 Timer Button (press down on Perry’s  

 

right hand) as needed to cycle through the MP3 Timer  

 

Settings: 60, 45, 30, 15 minutes or OFF. 

3.  Turn on your audio device and put it in PLAY mode.  
 

Adjust the volume on the audio device as needed.

 

The unit will play the audio from your audio device for  

 

the preset time, then turn off. To turn off the unit before  

 

the set time, press the MP3 Timer Button until OFF  

 

appears. Remember to turn off your audio device, too!

Alarm ON indicator

PM indicator

Time

Low Battery indicator

1. Press 

the 

SFX Button (press down on Perry’s left hand) 

to cycle through the various sound effects, speech and 
cool lighting effects.

SFX Button

Time Set Button

Clock Display

Alarm Set/Reset Button

Alarm On/Off Switch

Snooze Button

MP3 Timer/Off Button

MP3 Line-in Jack

Reset Port