Digidesign Control 24 사용자 설명서

Chapter 14: Automation

This chapter will explain how to maximize and 
expand the capabilities of Pro Tools mix auto-
mation with Control|24.

Automation Mode

You can set the Automation mode for all tracks, 
or all selected tracks, by toggling a channel’s 
AUTO switch.

To set the Automation mode for a track:

■

Press the AUTO switch for any channel re-

peatedly to scroll through and select the desired 
Automation mode. 

To set the Automation mode for all tracks from 
Control|24:

■

While pressing APPLY TO ALL CHANNELS or 

OPT(ALT)/ALL, press the AUTO switch for any 
channel repeatedly to select the desired Auto-
mation mode. 

To set the Automation mode for all selected 
tracks:

1  

Select any tracks you want to affect.

2  

While pressing APPLY TO ALL SELECTED 

CHANNELS or OPT(ALT)/ALL+SHIFT/ADD, 
press the AUTO switch for any selected channel 
repeatedly to select the desired Automation 
mode.

Recording Mix Automation

Control|24 replicates Pro Tools on-screen auto-
mation features, with channel-based and ses-
sion-wide automation controls. 

Channel Automation Switches

The AUTO switches found in each Control|24 
channel strip select the current channel auto-
mation mode (Read, Write, Trim, Latch, Touch, 
and Off). Current automation state is indicated 
using the LED labels to the right of each AUTO 
switch. When none of the LEDs are lit, automa-
tion is disabled for that channel.

Automation Section

The Automation section is located to the left of 
the fader bank, and consists of the MODE and 
ENABLE columns of six switches each, three 
WRITE AUTOMATION TO switches, and the 
AUTO SUSPEND switch.

AUTOMATION MODE Switches

The master AUTOMATION MODE switches aug-
ment the channel AUTO switch section, for se-
lecting channel automation mode.