Digidesign Control 24 사용자 설명서

To disable a plug-in parameter from automation:

1  

Select the desired plug-in to make it the con-

troller focus. 

2  

Press the AUTO/SELECT switch.

3  

Press the encoder switches below the parame-

ter names in the scribble strips that you want to 
suspend from automation. 

4  

Pressing a lit parameter encoder switch will 

toggle the automation arming off. The LED will 
extinguish and “AUTO” followed by “OFF” will 
flash briefly in place of the parameter name in 
the scribble strips.

Refer to the Pro Tools Reference Guide for more in-
formation about automating plug-ins.

Automating Plug-In Flip Mode

To enable plug-in automation in Plug-In Flip mode:

1  

Make sure the plug-in’s track is in an automa-

tion writing mode (Write, Touch, or Latch, or a 
Trim mode). 

2  

Make sure that plug-in automation recording 

is enabled (the PLUG-IN switch should be flash-
ing in the ENABLE column of the master AUTO-
MATION section).

3  

Press a channel AUTO switch, corresponding 

to the plug-in parameter you want to automate. 

When a parameter is armed for automation, the 
AUTO LED flashes. When automation is being 
written the AUTO LED remains lit.