Digicom COMSPHERE 3911 사용자 설명서

September 1998

3910-A2-GN32-40

Blind Dial Pause:  2sec
Nxt   2sec   4sec   6sec   8sec   10sec   20sec

Blind Dial Pause. Determines how long the modem waits before dialing a telephone number when Dialtone
Detect is disabled.

NOTE: The range of allowable values may be restricted in some countries.

The AT command is S-Register S6=n, where n is from 2 to 255 in 1-second increments.

BusyTone Detect:  Enable
Nxt   Enable   Disable

Busy Tone Detect. Sets the modem to monitor for Busy Tone (Enable) or ignore Busy Tone (Disable).

NOTE: This configuration option is normally enabled; however, if the modem receives false busy tones, this

configuration option can be disabled and the modem ignores all busy tones.

The AT commands for Disable are X0, X1, and X2.
The AT commands for Enable are X3, X4, X5, X6, and X7.

 “,” Pause Time:  2sec
Nxt   2sec   4sec   6sec   8sec   10sec   20sec

Pause Time. Determines the number of seconds the modem pauses when it encounters a comma (,) in the
dial command string.

NOTE: Although DCP selections are limited (2, 4, 6, 8, 10, or 20), values set by the AT commands can

display from 0 to 255 seconds.

The AT command is S-Register S8=n, where n is from 0 to 255 in 1-second increments.

NoAnswer Timout:  45sec
Nxt   45sec   30sec   60sec   120sec

No Answer Abort Timeout. Determines the number of seconds an originating modem waits before
abandoning a call attempt when no answer tone is received.

NOTE: Although DCP selections are limited (30, 45, 60, or 120), values set by AT commands can display

from 1 to 255 seconds.

NOTE: The range of allowable values may be restricted in some countries.

The AT command is S-Register S7=n, where n is from 1 to 255 in 1-second increments.