Digi Tech V-10 사용자 매뉴얼

다운로드
페이지 40
SAFETY INSTRUCTIONS 
Notice For customers iF Your uNit is equipped With A poWer cord.
WARNING: this AppLiANce shALL Be coNNected to A mAiNs socKet outLet 
With A protectiVe eArthiNG coNNectioN.
the cores in the mains lead are coloured in accordance with the following code:
GREEN and YELLOW - Earth        BLUE - Neutral        BROWN - Live
As colours of the cores in the mains lead of this appliance may not correspond with 
the coloured markings identifying the terminals in your plug, proceed as follows:
the core which is coloured green and yellow must be connected to the terminal 
in the plug marked with the letter e, or with the earth symbol, or coloured 
green, or green and yellow.
the core which is coloured blue must be connected to the terminal marked N 
or coloured black.
the core which is coloured brown must be connected to the terminal marked 
L or coloured red.
 this equipment may require the use of a different line cord, attachment plug, or both, 
depending on the available power source at installation. if the attachment plug needs 
to be changed, refer servicing to qualified service personnel who should refer to the 
following table. the green/yellow wire shall be connected directly to the units chassis.
CONDUCTOR
WIRE COLOR
Normal
Alt
L
LIVE
BROWN
BLACK
N
NEUTRAL
BLUE
WHITE
E
EARTH GND
GREEN/YEL
GREEN
WARNING: if the ground is defeated, certain fault conditions in the unit or in the 
system to which it is connected can result in full line voltage between chassis and 
earth ground. severe injury or death can then result if the chassis and earth ground 
are touched simultaneously.
the following is indicative of low altitude use; do not use this 
product above 2000m.
CAUTION: ensure vents on the V-10 are not blocked.
CAUTION: For use with Audio/Video equipment.
WARNING:
Apparatet må tilkoples jordet stikkontakt
Apparaten skall anslutas till jordat uttag
Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan