Desa Motion Sensing Halogen Fixture 5525 사용자 설명서

4

1.  The lamp is positioned too close to the 

sensor or pointed at nearby objects 
that cause heat to trigger the sensor. 
(Reposition the lamp away from the 
sensor or nearby objects.)

2.  Sensor is pointed toward a heat 

source like an air vent, dryer vent, 
or brightly-painted heat-refl ective 
surface. (Reposition sensor.)

3.  Control is in Manual Mode. (Set to 

1.  Heat or light from the lamp may be 

turning the Light Control on and off. 
(Reposition the lamp away from the 
sensor.)

2.  Heat being reflected from other 

objects may be affecting the sensor. 
(Reposition sensor.)

3.  Light Control is in the Test mode and 

warming up. (Flashing is normal under 
these conditions).

4.  If eave installation, Light Shield not 

installed properly. (Install Light Shield 
according to instructions.)

1.  Light switch is turned off.
2.  Bulb is loose or burned out.
3.  Fuse is blown or circuit breaker is 

turned off.

4.  Daylight turn-off is in effect (recheck 

after dark).

5.  Incorrect circuit wiring, if this is a 

new installation.

6.  Re-aim the sensor to cover desired 

area.

1.  Light control may be installed in a 

relatively dark location.

2.  Light control is in test. (Set control 

1.  Light control may be sensing small 

animals or automobile traffi c (re-aim 
sensor).

2.  Sensitivity is set too high. (Reduce 

1.  Sensor is detecting its own light. 

This is a “Limited Warranty” which gives you specifi c legal rights. You may also have other rights which vary from state to state or 
province to province.
For a period of 90 days from the date of purchase, any malfunction caused by factory defective parts or workmanship will be corrected 
at no charge to you.
Not Covered - Repair service, adjustment and calibration due to misuse, abuse or negligence, light bulbs, batteries, and other expend-
able items are not covered by this warranty. Unauthorized service or modifi cation of the product or of any furnished component will 
void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of use, 
unauthorized service, or return shipping charges.
This warranty covers only DESA Specialty Products assembled products and is not extended to other equipment and components that 
a customer uses in conjunction with our products.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY, 
REPRESENTATION OR CONDITION OF MERCHANT ABILITY OR THAT THE PRODUCTS ARE FIT FOR ANY PARTICULAR PUR-
POSE OR USE, AND SPECIFICALLY IN LIEU OF ALL SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE CUSTOMER AND THERE SHALL BE NO LIABILITY ON 
THE PART OF DESA SPECIALTY PRODUCTS FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, 
INCLUDING BUT NOT LIMITED TO ANY LOSS OF BUSINESS OR PROFITS, WHETHER OR NOT FORESEEABLE. Some states 
or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may 
not apply to you. Proof of purchase is required for warranty claims.

If you experience a problem, follow this guide. You may also want to visit our Web site at: www.desatech.com. 
If the problem persists, call* for assistance at 1-800-858-8501 (English speaking only), 7:30 AM to 4:30 PM CST 
(M-F). You may also write* to:
DESA Specialty Products
P.O. Box 90004, Bowling Green, KY 42102-9004
ATTN: Technical Service Specialty Products
* If contacting Technical Service, please have the following information available: Model Number, Date of Pur-
chase, and Place of Purchase.