DBI/Sala Water Dispenser 2100090 사용자 설명서

DBI‑SALA connectors (snap hooks and carabiners) are designed to be used only as specified in each 

product’s user’s instructions. 

See Figure 4 for inappropriate connections. DBI‑SALA snap hooks and carabiners should not be connected:

A.  To a D‑ring to which another connector is attached.

B.  In a manner that would result in a 

load on the gate.

C.  In a false engagement, where 

features that protrude from the 

snap hook or carabiner catch on 

the anchor and without visual 

confirmation seems to be fully 

engaged to the anchor point.

d.  To each other.

E.  Directly to webbing or rope lanyard or tie‑back (unless the manufacturer’s instructions for both the 

lanyard and connector specifically allows such a connection).

F.  To any object which is shaped or dimensioned such that the snap hook or carabiner will not close and 

lock, or that roll‑out could occur. 

2.4  INSTALLATION LOAd: The surface on which the Perimeter Limiter is installed must be capable of 

supporting the weight of the unit and fall arrest loads. The maximum static load is 470 lbs. (213 kg), the 

maximum foot pad loading during fall arrest for one user is 1,200 lbs. (545 kg) and 2000 lbs. (900 kg) for 

two users. See section 7, for the weight of each Perimeter Limiter model.

If the connecting element that a snap hook (shown) or carabiner attaches to is undersized or irregular in shape, a situation 

could occur where the connecting element applies a force to the gate of the snap hook or carabiner. This force may cause the 

gate (of either a self‑locking or a non‑locking snap hook) to open, allowing the snap hook or carabiner to disengage from the 

connecting point.

1. Force is applied to the 

snap hook.

2. The gate presses against the 

connecting ring.

3. The gate opens allowing the 

snap hook to slip off.

Small ring or 

other

non‑compatibly

shaped element