Manualsbrain.com
  1. 매뉴얼
  2. 브랜드
  3. DCS
  4. ANALOGUE TO DIGITAL CONVERTER dCS 904
  5. 사용자 설명서

DCS ANALOGUE TO DIGITAL CONVERTER dCS 904 사용자 설명서

다운로드
페이지 중 86
dCS 904 User Manual
 Manual for Software Version 1.5x and 1.36
dCS Ltd 
June 2000
Manual part no: DOC135904 iss 2B2
Page 59
135904ma2b2.pdf file available from website
Contact 
dCS
 on + 44 1799 531 999 
email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0)
web site: www.dcsltd.co.uk
10)  Check DACs for mode change. This command allows the Transmitter to
check the mode of the DACs.  If a unit has not changed the transmitter
should go back to step 8 and repeat the command.
Transmit -> [6][REQUEST_DSD_MODE]
Response -> [ACK immediate][6], actual mode
Transmit -> [7][REQUEST_DSD_MODE]
Response -> [ACK immediate][7], actual mode
Transmit -> [8][REQUEST_DSD_MODE]
Response -> [ACK immediate][8], actual mode
Transmit -> [9][REQUEST_DSD_MODE]
Response -> [ACK immediate][9], actual mode
11)  Check ADCs for mode change. This command allows the Transmitter to
check the mode of the ADCs.  If a unit has not changed the transmitter
should go back to step 9 and repeat the command.
Transmit -> [2][REQUEST_DSD_MODE]
Response -> [ACK immediate][2], actual mode
Transmit -> [3][REQUEST_DSD_MODE]
Response -> [ACK immediate][3], actual mode
Transmit -> [4][REQUEST_DSD_MODE]
Response -> [ACK immediate][4], actual mode
Transmit -> [5][REQUEST_DSD_MODE]
Response -> [ACK immediate][5], actual mode
The system should now be set up with the Master Clock configured for 44.1k
operation and the ADCs and DACs locked in P3D mode.