DCS ANALOGUE TO DIGITAL CONVERTER dCS 904 사용자 설명서
dCS 904 User Manual
Manual for Software Version 1.5x and 1.36
dCS Ltd
June 2000
Manual part no: DOC135904 iss 2B2
Page 62
135904ma2b2.pdf file available from website
Contact
dCS
on + 44 1799 531 999
email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0)
web site: www.dcsltd.co.uk
Power Consumption
The dCS 904 has a linear power supply, and so power consumption changes as
the mains voltage changes. The internal regulation is comparatively efficient for
a linear supply, so these changes are kept to a minimum. Power consumption is
independent of mains voltage selector switch setting.
the mains voltage changes. The internal regulation is comparatively efficient for
a linear supply, so these changes are kept to a minimum. Power consumption is
independent of mains voltage selector switch setting.
Power Consumption with Mains Voltage (measured as AC power into mains
socket):
socket):
Nominal mains
25 W
Mains -10%
22 W
Mains +10%
27 W
The actual intended supply voltage is shown on the rear panel. 50 Hz or 60 Hz
operation is not important – the unit can use either. In general, users will not
need to change the mains input configuration. If you do need this to be done,
please see the section
operation is not important – the unit can use either. In general, users will not
need to change the mains input configuration. If you do need this to be done,
please see the section
, page
68 in this
manual and contact your distributor or dCS.
Size and Weight
The dCS 904 dimensions correspond to a standard 2U 19" rack mount case.
Four heavy duty feet, fitted to the base, extend the overall height to slightly
greater than 2U.
Four heavy duty feet, fitted to the base, extend the overall height to slightly
greater than 2U.
Dimensions
Width
430 mm
see note (i)
Height, without feet
44 mm
(2U)
Height, with feet
52 mm
Depth
390 mm
see note (ii)
Weight
6.8 kg
see note (iii)
note (i)
Removable 19" rack mount ears are supplied,
taking total width to 483 mm (19").
taking total width to 483 mm (19").
note
(ii)
Measured from front panel to rear panel
connectors. Additional depth should be allowed to
accommodate cable connectors.
connectors. Additional depth should be allowed to
accommodate cable connectors.
note
(iii)
The high quality case is necessarily heavy,
consideration should be paid to appropriate support
shelving when installing the units in a rack.
consideration should be paid to appropriate support
shelving when installing the units in a rack.