DataVideo MP-4200 사용자 설명서
23
Remote Monitoring
MP-4100 supports remote live monitoring, recording, playback, automatic email alert and
software upgrade. To use these features, you need to connect your DVR to Internet or local
network, and setup the Ethernet Settings.
Remote Monitoring
After setting up networking for MP-4100, You may remote monitor your DVR from any PC.
software upgrade. To use these features, you need to connect your DVR to Internet or local
network, and setup the Ethernet Settings.
Remote Monitoring
After setting up networking for MP-4100, You may remote monitor your DVR from any PC.
Note:
Please make sure your DVR is connected to Internet or local network.
Simply open an Internet Explorer, enter your DVR’s IP address. If your DHCP is turned on,
you may find the DVR’s IP address from Box Information. From Main Page, click “Live
Monitoring”, Datavideo@Net application will be opened.
You will be asked for user name and password. There are 3 types of users. The default
passwords for each user are:
User name: guest; Password: one
User name: operator; Password: two
User name: supervisor; Password: three
Please make sure your DVR is connected to Internet or local network.
Simply open an Internet Explorer, enter your DVR’s IP address. If your DHCP is turned on,
you may find the DVR’s IP address from Box Information. From Main Page, click “Live
Monitoring”, Datavideo@Net application will be opened.
You will be asked for user name and password. There are 3 types of users. The default
passwords for each user are:
User name: guest; Password: one
User name: operator; Password: two
User name: supervisor; Password: three