Davis DRIVERIGHT 600 8156HD 사용자 설명서
7
.
Calibration Screen
3.
Drive the vehicle until you reach 40 km/h (25 MPH) and keep the
vehicle steady at that speed.
vehicle steady at that speed.
4.
Once the vehicle is moving steadily at the calibration speed, press
and hold SET/CLEAR.
The word CAL appears in the top right of the display when you press
SET/CLEAR. This indicates that the unit is in the process of calibrating.
and hold SET/CLEAR.
The word CAL appears in the top right of the display when you press
SET/CLEAR. This indicates that the unit is in the process of calibrating.
Unit Calibrating
5.
Continue to hold SET/CLEAR until the unit beeps and the word
“DONE” appears on the display.
This indicates that the unit has finished calibrating. The speed reading at
the top of the display will also change so that it reads much closer to
your speedometer’s reading.
“DONE” appears on the display.
This indicates that the unit has finished calibrating. The speed reading at
the top of the display will also change so that it reads much closer to
your speedometer’s reading.
Unit Finished Calibrating
km/h
MPH
SPEED
DISTANCE
MILES
K
K
m
SETTINGS
Speed Reading
Distance Reading
Calibration Speed
km/h
SPEED
DISTANCE
K
m
SETTINGS
Unit Calibrating
km/h
SPEED
DISTANCE
K
m
SETTINGS
Unit Finished Calibrating
DR600 UG Rev B D008.fm Page 7 Thursday, April 17, 2003 7:17 AM