BMW 2008 135i Coupe 사용자 매뉴얼
Replacing components
218
4.
Attach the connector, insert the bulb and
turn it all the way in the opposite direction.
turn it all the way in the opposite direction.
5.
Attach the headlamp cover.
Corner-illuminating lamps
H3 bulb, 55 watts
The figure shows the right-hand headlamp.
The figure shows the right-hand headlamp.
1.
Remove the top headlamp cover, using the
screwdriver to push the detents to one side.
screwdriver to push the detents to one side.
2.
Turn the bulb holder, see arrow, and
remove it.
remove it.
3.
Slide the bulb out of the holder and pull off
the connector.
the connector.
4.
Replace the bulb and attach the connector.
5.
Insert the bulb holder and turn it all the way
in the opposite direction.
in the opposite direction.
6.
Attach the headlamp cover.
Turn signals, front
21 watt bulb, PY21W Silver Vision
The turn signal bulb can be changed via a cover
in the wheel arch.
The turn signal bulb can be changed via a cover
in the wheel arch.
1.
Turn the respective wheel inwards.
2.
Using a coin, turn both locks of the cover all
the way to the left, arrow
the way to the left, arrow
1, and remove the
cover.
3.
Turn the bulb holder to the left and remove
it, arrow
it, arrow
2.
4.
Apply gentle pressure to the bulb while
turning it to the right for removal and
replacement.
turning it to the right for removal and
replacement.
5.
Insert the bulb holder and lock it by turning
it to the right.
it to the right.
6.
Attach the cover by positioning the bottom
edge first and then turning both locks all the
way to the right.
edge first and then turning both locks all the
way to the right.
Tail lamps
>
Turn signal:
21 watt bulb, PY21W
21 watt bulb, PY21W
>
Backup lamp:
16 watt bulb, W16W
16 watt bulb, W16W
>
Brake lamps:
21 watt bulb, P21W
21 watt bulb, P21W
>
Brake Force Display lamp:
21 watt bulb, H21W
21 watt bulb, H21W
1 Inner brake lamp
2 Outer brake lamp
2 Outer brake lamp
Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG