BMW 2007 X5 4.8i SAV 사용자 매뉴얼

112

Set the respectively applicable compass zone 
in your vehicle so that the compass functions 

properly, refer to the map of the world with 
compass zones below.

To set the compass zones, press the adjust-
ment button for approx. 3-4 seconds. The dis-
play indicates the number of the currently set 
compass zone.
To change the zone setting, briefly press the 
adjusting button repeatedly until the number of 
the compass zone that applies to your current 
position is displayed.
The compass will be operational again after 
approx. 10 seconds.

In the following situations, the digital compass 
must be calibrated:

>

The wrong cardinal direction appears on 
the display.

>

The cardinal direction displayed does not 
change despite a change in the direction of 
travel.

>

Not all cardinal directions are displayed.

1.

Make sure that there are no large metal 
objects or overhead power lines in the vicin-
ity of your vehicle and that you have enough 
space to drive in a circle.

2.

Input the currently applicable compass 
zone.

3.

Press the adjustment button for approx. 
6-7 seconds to display C. Then drive in a 
complete circle at least once at a maximum 
speed of 4 mph/7 km/h.
If the calibration is successful, the display C 
is replaced with the points of the compass.

Your digital compass is already set to right or 
left-hand drive vehicle to match your vehicle at 
the factory.

Online Edition for Part no. 01 41 0 012 501 - © 08/06 BMW AG