BMW 2007 X5 4.8i SAV 사용자 매뉴얼

Driving

Setting

Pull button. The parking brake is set.

The indicator lamp in the instrument
cluster lights up red. The parking brake
is set.
Indicator lamp on Canadian models.

The remote control does not have to be
inserted into the ignition lock for the parking
brake to be set.

While driving

If exceptional circumstances should make it
necessary to set the parking brake while the
vehicle is in motion, pull on the button longer.
The vehicle continues to brake forcefully for as
long as you pull on the button.

The indicator lamp in the instrument
cluster lights up red, a chime sounds
and the brake lamps light up.
Indicator lamp on Canadian models.

As soon as you brake the vehicle almost to a
stop, i.e., down to a speed of approx. 2 mph/
3 km/h or below, the parking brake remains set.

Releasing

With engine running

Press the button with the brake depressed.

The indicator lamp in the instrument
cluster goes out.

Indicator lamp on Canadian models.

With engine switched off

Press the button with the brake depressed.
This function is useful, for example, in auto-
matic car washes, refer to pages

124

When leaving the vehicle, take the remote
control with you; this precaution prevents

children from releasing the parking brake, etc.

Parking brake malfunction

In case of a failure of or fault in the parking
brake, secure the vehicle against rolling if you
leave the vehicle.

Releasing parking brake manually

In the event of an electrical power loss or elec-
trical malfunction, you can release the parking
brake manually.

Before manually releasing the parking
brake and each time you park the vehicle

without setting the parking brake, make sure
that the automatic transmission is in position P,
refer to page

. Be sure to pay attention to the

information in the instrument cluster.
In addition, secure the vehicle against rolling,
e.g. with a chock. Otherwise there is a danger