Buffalo Technology LINKSTATION HD-HLAN 사용자 설명서
Check the LINK/ACT light on the front of the LinkStation. If it is lit, then
LinkStation is connected properly; please turn to page 4 to continue setup.
If it is not lit, continue to the next step.
Verify that the LINK/ACT light on the front of LinkStation is lit (see Step 4’s
picture). If it is lit, turn to page 4 to contintue setting up LinkStation. If the
LINK/ACT light is still not lit, please verify the following:
If problems persist, contact our 24/7 technical support at
(866) 75-610.
Both LinkStation and the hub, switch, or PC are powered on.
The Ethernet Cable is securely fastened to both devices.
The Ethernet Cable is not damaged. To verify try using
The Ethernet Cable is securely fastened to both devices.
The Ethernet Cable is not damaged. To verify try using
another Ethernet Cable. When verifying new cables, remember
to switch the black ‘Cable Selection’ switch to both positions.
Step : Check your Connection