BMW 745LI 사용자 설명서

Driving

and-go traffic, etc. As the vehicle then no
longer tends to creep when the transmis-
sion is engaged, it is no longer necessary
to hold the vehicle by depressing the brake
pedal.

It prevents the vehicle from rolling back-
ward during uphill starts.
The parking brake also engages automati-
cally when you switch off the engine after
stopping the vehicle.

You can activate and deactivate the Auto-
matic Hold feature by selecting the "Set-
tings" menu in the Control Center.
A description of the Control Center is pro-
vided on page

Automatic Hold activation/
deactivation

Select "Settings"

Select

and confirm your selec-

tion

Select "AUTO P". Press the controller
to activate/deactivate the desired func-
tion

Automatic Hold is activated.
The green AUTO P status message in
the Info Display shows you that the
system is ready for operation

Automatic Hold is deactivated.
The green AUTO P status message dis-
appears from the Info Display.

You can program the programmable
function button on the steering wheel

to control the Automatic Hold function,
refer to page

This will allow you to activate and deacti-
vate the Automatic Hold function quickly

and without distraction from traffic and
road conditions.

You can also deactivate Auto-
matic Hold by pressing the
button while the vehicle is sta-
tionary. The vehicle remains
stationary, the indicator lamp

changes from green to red. Press the
button again to release the parking brake.

Driving with Automatic Hold

The parking brake engages automatically
when the vehicle comes to a stop. The indi-
cator lamp

in the Info Display lights

up green.

To start off again, simply press the acceler-
ator pedal. The parking brake is released
automatically; the indicator lamp
goes out.

Do not drive through an automatic car
wash with Automatic Hold on and the

engine running. The system would engage
the parking brake while the vehicle is sta-
tionary.

Parking with Automatic Hold

The parking brake engages automatically
when you stop the vehicle and switch off
the engine. The indicator lamp
changes from green to red.

Provided that the remote control unit
is engaged in the ignition lock, you

can also release the parking brake manu-
ally after switching off the engine, refer to
page

. This option is useful in automatic

car washes, etc.
Automatic Hold is deactivated.

When leaving the vehicle, always
release the remote control unit from

the detent in the ignition lock; this precau-
tion prevents children from disengaging the
parking brake, etc.