BMW 2004 525i Sedan 사용자 매뉴얼

다운로드
페이지 220
 53
towards D or change the current gear using 
the shift paddles or selector lever. 
Gear changes 
Using selector lever
>
To shift up, briefly press the selector 
lever towards + 
>
To shift down, briefly press towards —. 
Using shift paddles on steering 
wheel 
>
To shift up, pull one of the shift paddles 
>
To shift down, press. 
You accelerate from higher gears, e.g. 
when overtaking, by shifting down manu-
ally. 
In the following situations, the SMG in the 
sequential mode assists you: 
>
Upshifts and downshifts are executed 
only when they will result in a plausible 
combination of engine and vehicle 
speed; thus, for example, a downshift 
that would cause the engine to overrev 
will not be executed by the system 
>
When the vehicle is stopped, the trans-
mission automatically downshifts into 
first gear 
>
Shortly before dropping below a gear-
dependent minimum speed, the trans-
mission downshifts automatically even 
without your intervention. 
Display in the instrument cluster
Gear display
R N 1 2 3 4 5 6
D1 D2 D3 D4 D5 D6
The gear currently selected, the selected 
shifting mode and, if applicable, malfunc-
tions are displayed in the instrument clus-
ter. 
Malfunctions
Indicator lamp
If the indicator lamp lights up, a 
malfunction has occurred in the 
transmission system. 
While it will remain still possible to move 
the selector lever to any desired position, 
the transmission will revert to operation in 
its default mode with only a limited number 
of forward gears.
If this happens, avoid extreme engine loads 
and consult the nearest BMW center. 
Warning tone
In case of overheating in the area of the 
transmission, an acoustic signal indicates 
that you should stop or start off quickly if 
possible so that the system can cool down 
again.
Information on jump-starting and towing 
begins on page 
Online Edition for Part No. 01 41 0 157 647 - © 07/03 BMW AG