BMW 2004 525i Sedan 사용자 매뉴얼

Controls

Reference

At a glance

Driving tips

Communications

Navigation

Entertainment

Mobility

The symbols also indicate the status of the
service requirement display, refer to
page

Calling up stored messages on the
Control Display

Using the CHECK button

Press the button longer:
The first stored message is displayed

Briefly press the button:
Another message is displayed each
time the button is briefly pressed.

Using the Control Center

Control Center, for principle details, refer to
page

Open the start menu by pressing the
button

Open the menu by pressing the con-
troller

Select "Service" and press the control-
ler

Select "Check Control messages" and
press the controller. The stored mes-
sages appear on the display

Select the desired message and press
the controller.

The display disappears automatically after
a short time.
To close the display immediately:
Select

and press the controller

Displays after completion of trip

Malfunction reports generated during the
trip are shown consecutively when you
switch off the ignition.

If applicable, the message "Parking lamps
on!" appears at the end of a trip when you
open the driver's door.
In addition, a gong sounds:
As long as the display has not disappeared,
you can view the messages again. Press
the CHECK button for approx. 2 seconds. If
several messages are present, you can
continue to press the CHECK button to
view them in succession.

The Check Control function

cancels itself automatically after a brief
period

can be canceled by again pressing the
CHECK button for approx. 2 seconds.