BMW 2004 745i Sedan 사용자 매뉴얼
75
Operating the active cruise control
1
Activate system,
store and increase desired speed
store and increase desired speed
2
Activate system,
store and decrease desired speed
store and decrease desired speed
3
Deactivate system
4
With system deactivated:
Briefly press the button to recall the
stored speed and distance
Briefly press the button to recall the
stored speed and distance
4
With system activated:
Increase desired speed by 1 mph/
1 km/h with each press of the button
Increase desired speed by 1 mph/
1 km/h with each press of the button
5
Select distance to vehicle driving
ahead. You can choose from four avail-
able distance settings. You will find
more detailed information on page
ahead. You can choose from four avail-
able distance settings. You will find
more detailed information on page
Adjust your desired speed to the traf-
fic conditions and remain ready to
fic conditions and remain ready to
brake at all times. Great differences in
speed to the vehicles driving ahead, e.g.
when quickly approaching a truck or when
another vehicle swerves into your lane,
cannot be compensated for by the sys-
tem.
speed to the vehicles driving ahead, e.g.
when quickly approaching a truck or when
another vehicle swerves into your lane,
cannot be compensated for by the sys-
tem.
<
Activating the system
From approx. 20 mph/30 km/h you can
activate the system by pressing the lever
activate the system by pressing the lever
forward or pulling it back:
The current driving speed is stored as a
desired speed and briefly displayed in the
speedometer, refer to arrow.
The current driving speed is stored as a
desired speed and briefly displayed in the
speedometer, refer to arrow.
If the display ACC --- mph/km/h
appears briefly in the speedometer,
appears briefly in the speedometer,
it might be that conditions necessary for
operation are not currently being met.
To call up Check Control messages, refer
to page
operation are not currently being met.
To call up Check Control messages, refer
to page
.
<
1 Storing and increasing desired
speed
speed
Press the lever forward:
The system applies and stores your current
speed as a desired speed. The speedome-
ter indicates this speed.
Subsequently pressing forward increases
the desired speed to the next 5-mile place/
10 km/h.
Each time the lever is pressed forward
again, the desired speed is increased by
another 5 mph/10 km/h until a maximum of
110 mph/180 km/h is reached. The speed
then displayed is stored and reached on a
clear road.
The system applies and stores your current
speed as a desired speed. The speedome-
ter indicates this speed.
Subsequently pressing forward increases
the desired speed to the next 5-mile place/
10 km/h.
Each time the lever is pressed forward
again, the desired speed is increased by
another 5 mph/10 km/h until a maximum of
110 mph/180 km/h is reached. The speed
then displayed is stored and reached on a
clear road.
2 Storing and decreasing desired
speed
speed
Pull back the lever:
The current driving speed is rounded off to
the next 5-mile place/10 km/h, displayed
and stored.
Each time the lever is pulled back again,
the desired speed is decreased by another
5 mph/10 km/h until the minimum speed of
20 mph/30 km/h is reached. The speed
then displayed is stored and reached on a
clear road.
The current driving speed is rounded off to
the next 5-mile place/10 km/h, displayed
and stored.
Each time the lever is pulled back again,
the desired speed is decreased by another
5 mph/10 km/h until the minimum speed of
20 mph/30 km/h is reached. The speed
then displayed is stored and reached on a
clear road.
3 Deactivating the system
Press the lever up or down while the sys-
tem is active. The displays in the speedom-
eter disappear. You can use the system
again as required.
tem is active. The displays in the speedom-
eter disappear. You can use the system
again as required.
In addition, the system is deactivated auto-
matically:
matically:
>
When you apply pressure to the brake
pedal
pedal
Online Edition for Part No. 01 41 0 157 670 - © 08/03 BMW AG