Braun Citromatic 4161 사용자 설명서
5
Our products are engineered to meet the highest standards
of quality, functionality and design. We hope you thoroughly
enjoy your new Braun appliance.
of quality, functionality and design. We hope you thoroughly
enjoy your new Braun appliance.
Important
Read all instructions carefully before using this product.
•
Read all instructions carefully before using this product.
•
This appliance is constructed to process normal
household quantities.
household quantities.
•
Keep the appliance out of the reach of children.
•
This appliance has a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this
plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
than the other). To reduce the risk of electric shock, this
plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
•
Before plugging into a socket, check that your voltage
corresponds with the voltage printed on the bottom of
the appliance.
corresponds with the voltage printed on the bottom of
the appliance.
•
Do not immerse the motor block (1) in water, nor hold it
under running water.
under running water.
•
Braun electric appliances meet applicable safety
standards. Repairs on electric appliances (including
cord replacement) must only be carried out by author-
ized service centers. Faulty, unqualified repair work may
cause accidents or injury to the user.
standards. Repairs on electric appliances (including
cord replacement) must only be carried out by author-
ized service centers. Faulty, unqualified repair work may
cause accidents or injury to the user.
Description
1
Motor block
2
Pulp scale
3
Jug
4
Strainer
5
Cone
6
Lid (MPZ 9 only)
7
Cord storage
Maximum capacity
MPZ 9: 32 fl. oz / 1000 ml
MPZ 6: 12 fl. oz / 350 ml
MPZ 9: 32 fl. oz / 1000 ml
MPZ 6: 12 fl. oz / 350 ml
Assembling and disassembling
Press the cone (5) into the strainer (4) until the cone snaps
into place, then place the strainer on the jug (3).
To place the jug on the motor block (1), proceed as follows:
MPZ 9: The line at the left end of the pulp scale (2) must be
into place, then place the strainer on the jug (3).
To place the jug on the motor block (1), proceed as follows:
MPZ 9: The line at the left end of the pulp scale (2) must be
positioned over one of the arrows on the motor
block (a).
block (a).
MPZ 6: The arrow at the left end of the pulp scale (2) must
be positioned over one of the arrows on the motor
block (a).
block (a).
Then turn the jug clockwise until it is locked on the motor
block. When disassembling, proceed in reverse order.
block. When disassembling, proceed in reverse order.
Adjustable fruit pulp content
The amount of fruit pulp in the juice can be continuously
adjusted by turning the jug within the pulp scale (2) (a).
MPZ 9: 5 = high fruit pulp content
adjusted by turning the jug within the pulp scale (2) (a).
MPZ 9: 5 = high fruit pulp content
1 = low fruit pulp content
MPZ 6: At the left, dark end of the pulp scale, the fruit pulp
content is higher. At the right, light end, the fruit
pulp content is lower.
pulp content is lower.
Cord store
There is a practical cord store (7) feature underneath the
motor block (1). You only need to unwind as much cord as
you need (c). To do this, remove the jug from the motor
block.
motor block (1). You only need to unwind as much cord as
you need (c). To do this, remove the jug from the motor
block.
Squeezing juice
After assembling the appliance (and adjusting the desired
fruit pulp content), press half of a citrus fruit onto the cone
(5), (b). When the fruit is pressed down, the motor will start.
When lifted off the cone, the motor turns off automatically.
Switching the motor on and off by lifting and pressing down
the fruit, can causes the cone to reverse direction and
increases the amount of squeezed juice.
Before serving, remove the jug from the motor block.
fruit pulp content), press half of a citrus fruit onto the cone
(5), (b). When the fruit is pressed down, the motor will start.
When lifted off the cone, the motor turns off automatically.
Switching the motor on and off by lifting and pressing down
the fruit, can causes the cone to reverse direction and
increases the amount of squeezed juice.
Before serving, remove the jug from the motor block.
Cleaning
Before cleaning, always unplug the appliance. Disassemble
the appliance as described. Clean the motor block (1) with
a damp cloth only. All the other parts can be cleaned in the
dishwasher (d).
MPZ 9 only: Food can deposit and build up in the handle
from regular dishwasher use. To clean the handle, insert
a blunt, thin object into the small opening at the bottom of
the handle to remove the cover. Replace the cover after
cleaning.
the appliance as described. Clean the motor block (1) with
a damp cloth only. All the other parts can be cleaned in the
dishwasher (d).
MPZ 9 only: Food can deposit and build up in the handle
from regular dishwasher use. To clean the handle, insert
a blunt, thin object into the small opening at the bottom of
the handle to remove the cover. Replace the cover after
cleaning.
Subject to change without notice.
4161368_MPZ6_9_S4_ Seite 5 Donnerstag, 28. August 2003 9:59 09