Boss Audio Systems Music Pedal RP250 사용자 설명서

  

7

These two Footswitches are used to select presets, access the Tuner, or bypass the RP250.  The 

Footswitch on the right will select the next preset up, and the Footswitch on the left will select 

the next preset down.  Pressing both Footswitches together will bypass the currently selected 

preset.  Pressing and holding both Footswitches will access the Tuner.  Press either Footswitch to 

exit Bypass or Tuner mode.

These four knobs perform various functions, depending on which mode is currently active and 

what (if anything) is being edited.  The functions are listed below:

1.  In Performance mode, this knob selects from a library of preset amp tones.             

     

    (See page 46 for a list of preset amp tones.)

2.  When editing a preset, this knob changes the Amp or Effect model for the selected row.

3.  When editing an Effect row, press this knob to turn on or bypass the effect.

4.  When the Drums row is selected, this knob selects the first pattern of each drum pattern    

    style (Rock, Blues, Jazz, etc.). 

1.  In Performance mode, this knob selects from a library of preset effect configurations. (See   

    page 47 for a list of preset effect configurations.)

2.  When editing a preset, this knob modifies the parameter listed in the column  

 

    

    directly above it for the selected Effect row.

3.  When the Drums row is selected, this knob selects the different drum patterns available.

4.  When the Expression row is selected, this knob selects which parameter is assigned to the 

Expression Pedal.