Boss Audio Systems 612UA 사용자 설명서

 

After the unit getsconnected to the power supply, short press the button to turn 

The unit on,long press it to turn the unit off.Repeatedly short press SEL button 
to select your desired mode in the following sequence

:

Work with VOL button, rotate it to make adjustment.
Rotate the button to adjust the volume level, the change value of volume level
shall be displayed on LCD screen.
2. BAND/AST (band switch/station auto scan &store)
Under radio status, press the button to shift band cyclically as shown below,
the actual shift is the standard.

Hold AST button for 3 seconds to automatically scan station in the whole band
and store station. Press the number button to listen to stored stations.
During reading a card, long press the button to display TRK SCH to search for 
track. Work with VOL+/- to make adjustment and press SEL for confirmation.
 If no adjustment is made within 3 seconds, system automatically skips from 
units to tens and hundreds. During adjustment, press BND to move back to the
previous digit level. Short press this button to browse ID3 information.  

VOL→BASS→TRE→BAL→FAD→LOUD→EQ→ST→BEEP→AREA

(USA: America/EUR: Europe) 

1 Fm1→Fm2→Fm3→Am1→Am2→Fm1;
2 Fm1→Fm2→Fm3→Mw1→Mw2→Fm1;

 

When the power is on, each time the button is pressed, the mode switches

Between RADIO/USB/SD(MMC)/AUX.

 

-04-