Manualsbrain.com
  1. 매뉴얼
  2. 브랜드
  3. Boss Audio Systems
  4. GS-10
  5. 사용자 설명서

Boss Audio Systems GS-10 사용자 설명서

다운로드
페이지 중 180
162
Setting the Special Driver’s Functions
Adjusting the audio latency
When using the GS-10 in Advanced mode, you can change the driver settings to adjust the latency 
of the audio. To adjust the latency, change the Buffer Size in the driver settings dialog box.
1.
2.
Adjust the driver buffer size.
The following setting will produce the shortest latency.
Windows:
Set “Audio Buffer Size” to the far left (Min).
Macintosh:
Set “Buffer Size” to the far left (Min).
3.
Click [OK] to close the driver settings dialog box.
4.
Restart the application that is using the GS-10.
If you are using an application that has a function for testing audio devices, get it to perform its tests.
5.
Play back audio data on your application.
If interruptions occur in the sound, repeat this procedure, and gradually increase the buffer size 
specified in step 2 until interruptions no longer occur.
* Depending on the application you are using, there may be a buffer size or latency adjustment function among 
the audio settings of the application as well. For details, refer to the operation manual for your application.
Using ASIO Direct Monitor
If you are using the GS-10 from an ASIO 2.0 compatible application, switching of the GS-10’s output 
signals (“Switching the Output Signals (Direct Monitor)” (p. 79)) can be controlled from your ASIO 
2.0 compatible application.
1.
2.
Check the “Use ASIO Direct Monitor” check box.
3.
Click [OK] to close the driver settings dialog box.
* Depending on the application you are using, there may be a ASIO Direct Monitor among the audio settings of 
the application as well. For details, refer to the operation manual for your application.
* When using ASIO Direct Monitor, monitoring may switch on/off at unexpected times, depending on the 
application settings and on the recording procedure. If this occurs, uncheck the check box in step 2 to disable 
ASIO Direct Monitor.