Bosch Appliances Smoke Alarm D2071A 사용자 설명서
19
Bosch | 09/04 | 74-06200-000-F
D2071A | Operations & Installation Guide | 3.0 Programming
3.2
Function Keys
Table 7 identifies the six function keys that simplify
using the programmer.
using the programmer.
3.3
Data Keys
Use the white keys on the keyboard for data entry.
3.4
Tones
The D5200 Programmer emits four distinct sounds to
notify users of key presses, data acceptance or rejection,
and system errors (Table 8).
notify users of key presses, data acceptance or rejection,
and system errors (Table 8).
3.5
Editing a Record
1.
Scroll to the D2071 Product Handler from the
Product Handlers Menu using [
Product Handlers Menu using [
↑
] or [
↓
] and press
[ENTER GROUP].
2. Scroll to the appropriate record title using [
↑
] or [
↓
]
] and press [ENTER GROUP].
3. Use [
↑
] or [
↓
] to scroll to the appropriate program.
Edit the entry and press [ENTER] to input the data.
4. Press [EXIT GROUP] to exit the record. The Save
display appears if changes were made to any
program item entries in the record.
program item entries in the record.
3.6
Programmer Connection
Access the four-pin programmer connector ( J3) by
sliding back the D2071A’s cover. This connector is
located next to Terminal 1 (refer to Figure 1 on
sliding back the D2071A’s cover. This connector is
located next to Terminal 1 (refer to Figure 1 on
page 7
).
The D2071A is ready for programming after connecting
it to the programmer; it is not necessary to reset the
D2071A before loading to or copying from the panel.
it to the programmer; it is not necessary to reset the
D2071A before loading to or copying from the panel.
Programming before installing the phone
lines might sound the buzzer.
lines might sound the buzzer.
You can program the D2071A before installation. If the
D2071A is powered and not connected to a telephone
line, the Phone Fail Buzzer sounds after approximately
10 min. Power down the unit to silence the buzzer.
D2071A is powered and not connected to a telephone
line, the Phone Fail Buzzer sounds after approximately
10 min. Power down the unit to silence the buzzer.
Program the D2071A using the D5200 Programmer
with the D2071 Product Handler.
with the D2071 Product Handler.
Before programming, read and become
familiar with this section of the Operation
and Installation Guide.
familiar with this section of the Operation
and Installation Guide.
3.7
Entering the 2071 Handler
1.
At the Product Handler Level, press
[↓]
and scroll
down to
2071.
2. Press [ENTER GROUP].
3. When the cursor appears on the NEWRECORD
prompt, press [ENTER GROUP].
Account# appears.
Table 7:
Function Keys
Key Use
ON
Key switch that turns on the programmer.
Does not power down the programmer. Turn
off by selecting 5200 OFF in the Product
Handlers Menu. Powers down automatically
after the programmed Time Out time elapses.
Does not power down the programmer. Turn
off by selecting 5200 OFF in the Product
Handlers Menu. Powers down automatically
after the programmed Time Out time elapses.
HELP
Switches programmer into Help Mode. Refer
to the D5200 Programmer Operation Manual
(P/N: 74-06176-000) for more information.
to the D5200 Programmer Operation Manual
(P/N: 74-06176-000) for more information.
CANCEL
Cancels changed items if you did not press
[ENTER] to accept the change.
[ENTER] to accept the change.
RECV
(COPY)
(COPY)
Moves a copy of the record in the attached
product to the D5200 Programmer.
product to the D5200 Programmer.
SEND
(LOAD)
(LOAD)
Moves a copy of the record in the D5200
Programmer to a product being programmed.
Programmer to a product being programmed.
CLEAR
Erases an un-entered or entered program item
data and replaces it with blank spaces.
data and replaces it with blank spaces.
Note: All function keys are red.
Table 8:
Tones
Sound Signifies
Click
Short, sharp tone that occurs each time you
press a key. The programmer does not click
when you press [ON], [CAP LOCK], and
[SHIFT].
press a key. The programmer does not click
when you press [ON], [CAP LOCK], and
[SHIFT].
Pip
Short, single frequency tone sounds when you
press [ENTER] and the D5200 accepts the
change.
press [ENTER] and the D5200 accepts the
change.
Tweedle
Quick series of pips indicating you pressed an
invalid key or made an inappropriate entry.
invalid key or made an inappropriate entry.
Buzz
Flat tone indicating a system error. Examples of
typical system errors are:
typical system errors are:
•
A product is not connected to the D5200
when you attempt to copy or load it.
when you attempt to copy or load it.
•
The D5200 notifies you of a low battery
condition.
condition.
•
The D5200 announces it will automatically
count down and turn off.
count down and turn off.
•
You are attempting to delete a record or
handler.
handler.
•
You are entering into a product handler
containing a Timeout Save Record. The
Timeout Save Record was saved by the
D5200 when it automatically turned off to
save power.
containing a Timeout Save Record. The
Timeout Save Record was saved by the
D5200 when it automatically turned off to
save power.