Blaupunkt BOLOGNA RCR 126 사용자 설명서
32
Specifications
Amplifier
Output power:
Output power:
4 x 20 W RMS power
acc. to DIN 45324
(14.4V),
4 x 30 W max. power
(14.4V),
4 x 30 W max. power
Tuner
Wavebands
FM
Wavebands
FM
:
87.5 – 108 MHz
MW
:
531 – 1602 kHz
LW
:
153 – 279 kHz
FM sensitivity:
1.0
µ
V at 26 dB
signal-to-noise ratio
FM frequency
response:
response:
35 - 16 000 Hz
Tape player
Frequency
response:
Frequency
response:
35 - 16 000 Hz
Appendix
Overview of the DSC factory
settings
settings
TA VOL
: 4
BEEP
: 3
LED (Code) : 1
LOUD
LOUD
: 4
RM
: OFF
LOCAL
: 1
DIS
: 1
Care notes
Release panel
To ensure that the unit functions properly it is
important that the contacts between the re-
lease panel and the head unit are free from
any foreign particles.
If necessary, clean the contacts using a cot-
ton swab soaked with alcohol.
To ensure that the unit functions properly it is
important that the contacts between the re-
lease panel and the head unit are free from
any foreign particles.
If necessary, clean the contacts using a cot-
ton swab soaked with alcohol.
Mechanism/cassette tapes
To avoid possible problems, you should not
use cassette tapes longer than 60 or 90
minutes (C60/C90). Store your tapes in a
cool place away from dirt, dust and tempera-
tures exceeding 50
To avoid possible problems, you should not
use cassette tapes longer than 60 or 90
minutes (C60/C90). Store your tapes in a
cool place away from dirt, dust and tempera-
tures exceeding 50
°
Celsius. Allow very cold
tapes to warm up before playing them in
order to avoid uneven tape transport. After
approximately 100 hours of use, dust partic-
les collected on the playback head or roller
may lead to tape run problems and sound
distortions.
Use a head cleaning tape to remove normal
dirt build-up. For tougher cases, use a cotton
swab (Q-Tip) soaked with alcohol. Do not
attempt to clean by inserting a hard object
into the player!
order to avoid uneven tape transport. After
approximately 100 hours of use, dust partic-
les collected on the playback head or roller
may lead to tape run problems and sound
distortions.
Use a head cleaning tape to remove normal
dirt build-up. For tougher cases, use a cotton
swab (Q-Tip) soaked with alcohol. Do not
attempt to clean by inserting a hard object
into the player!
Subject to modifications!
BA Bolo RCR 126 gb®
03.06.2002, 13:38 Uhr
32