LG ST600 사용자 매뉴얼

13

C

onnecting

 

y When you connect a HDMI or DVI compatible 

device make sure of the following:

 

- Try switching off the HDMI/DVI device and 

this unit. Next, switch on the HDMI/DVI 
device and leave it for around 30 seconds, 
then switch on this unit.

 

- The connected device’s video input is set 

correctly for this unit.

 

- The connected device is compatible with 

720x576p, 1280x720p, 1920x1080i or 
1920x1080p video input.

 

y Not all HDCP-compatible HDMI or DVI devices 

will work with this unit.

 

- The picture will not be displayed properly 

with non-HDCP device.

 

y If a connected HDMI device does not accept 

the audio output of the unit, the HDMI 
device’s audio sound may be distorted or 
may not output.

 

y When you use HDMI connection, you can 

change the resolution for the HDMI output. 
(Refer to “Resolution Setting” on page 13)

 

y Select the type of video output from the 

HDMI OUT jack using [HDMI Color Setting] 
option on the [Setup] menu (see page 23).

 

y Changing the resolution when the 

connection has already been established 
may result in malfunctions. To solve the 
problem, turn off the unit and then turn it 
on again.

 

y When the HDMI connection with HDCP 

is not verified, TV screen is changed to 
black screen. In this case, check the HDMI 
connection, or disconnect the HDMI cable.

 

y If there are noises or lines on the screen, 

please check the HDMI cable (length is 
generally limited to 4.5 m(15 ft.)).

 

,

The unit provides several output resolutions for 
HDMI OUT. You can change the resolution using 
[Setup] menu.
1.  Press HOME (n). 

2.  Press green (G) colored button. The [Setup] 

menu appears.

3.  Use W/S to select [DISPLAY] option then 

press D to move to the second level. 

4.  Use W/S to select the [Resolution] option 

then press Center button to move to the third 
level.

5.  Use W/S to select the desired resolution then 

press Center button to confirm your selection.