Billy Goat TKD505SPT 사용자 설명서
Part No. 890316 Form No. F082195D
Page 12 of 12
Part No.
Engine stalls or labors when
chipping.
chipping.
Feeding branches into chipper too rapidly. Engine service may be
required.
required.
Feed branches at a slower rate. Service engine.
Poor chipping performance.
Extremely hard wood. Dull or damaged chipper blade.
Avoid extremely hard wood. Sharpen or replace chipper blade (see
page 8).
page 8).
Will not vacuum or has poor
vacuum performance.
vacuum performance.
Clean debris bag. Shake bag clean or wash. Adjust nozzle height.
Check for hose kit cap. Unclog nozzle or exhaust (see page 5).
Allow air to feed with debris.
Check for hose kit cap. Unclog nozzle or exhaust (see page 5).
Allow air to feed with debris.
Solution
Problem
Possible Cause
TROUBLESHOOTING
Before Requesting Service Review These Suggestions
Engine will not start.
Check stop switches, throttle, and gasoline. Connect spark plug wire.
Clean or replace air cleaner. Or contact a qualified service person.
Clean or replace air cleaner. Or contact a qualified service person.
Self propelled drive will not
release.
release.
Clutch cable out of adjustment. Clutch not lubricated and is locked-
up.
up.
Adjust clutch cable. See page 9 Clutch Adjustment. Oil clutch.
No self propelling.
Operator's bail not releasing clutch. Broken or out of adjustment
clutch cable. Worn or broken clutch assembly. Bracket control
assembly (item 112) out of adjustment.
clutch cable. Worn or broken clutch assembly. Bracket control
assembly (item 112) out of adjustment.
Adjust clutch cable. Adjust bracket control assembly. Replace any
worn or damaged or malfunctioning parts.
worn or damaged or malfunctioning parts.
Throttle in off position. Out of gasoline. Bad or old gasoline.
Spark Plug wire disconnected. Dirty air cleaner.
Spark Plug wire disconnected. Dirty air cleaner.
Abnormal vibration.
Loose or out of balance impeller or loose engine.
Check impeller and replace if required. Check Engine.
Engine is locked, will not
pull over.
pull over.
Debris locked in chipper blade, hopper or inside impeller. Engine
problem.
problem.
See page 5, Clearing a clogged chipper hopper. Contact an engine
servicing dealer for engine problems.
servicing dealer for engine problems.
Dirty debris bag. Nozzle height set too high or too low. Hose kit cap
missing. Clogged nozzle or exhaust. Excessive quantity of debris.
missing. Clogged nozzle or exhaust. Excessive quantity of debris.
Description
Item
No.
TKD505SPT
Parts List
continued from
page 11.
continued from
page 11.
19
86
WHEEL WITH SPROCKET ASS’Y CAST (21, 94, 95, 96)
890242
2
87
CHAIN 52 PITCH
890239
2
88
CHAIN 40 PITCH
900323
1
89
WASHER FLAT 5/16 (3/8 ID x 7/8 x 1/16)
*8171003
4
90
BOLT CARRIAGE 5/16 -18 x 3/4
*8024039
4
91
WASHER SPRING LOCK 5/16
*8177011
4
92
NUT REGULAR 5/16-18
*8142002
5
93
JACKSHAFT
900320
1
94
SPROCKET (PER ASSEMBLY) (SIZE # 65A26) 26 TEETH
890238
1
95
SCREW SELF TAP 1/4-14 x 3/4 (PER ASSEMBLY)
800505
5
96
WASHER LOCK EXTERNAL TOOTH (PER ASSEMBLY)
*8181007
5
97
JACKSHAFT ASS’Y
(INCLUDE. 93, 101, 102, 107, 108, 109)
890197
1
98
SHIELD MUFFLER TKDSP
890190
1
99
LABEL CLUTCH830503
1
100
LABEL-WARNING GUARDS
900327
1
101
BEARING PLATE
900317
2
102
BEARING BALL (WITH SNAP RING)
900321
2
103
WASHER LOCK 1/4
*8177010
2
104
ROD BAIL CLUTCH900970
1
105
BAR BRACE HANDLE
900768
1
106
SCREW CAP 5/16-18 x 3/4
*8041026
1
107
SPROCKET - 17 TOOTH900303
1
108
SPROCKET - 8 TOOTH900302
2
109
ROLL PIN 3/16 DIA. x 1 1/4 LG.
*8195166
4
110
LOCKNUT 5/16 - 18 FLANGE
850164
5
111
112
112
BRACKET CONTROL ASS’Y (INCL. 113, 114, 115)
900221
1
113
SPRING
900136
1
114
ROLL PIN 1/8” DIA. x 1 1/4 LG.
*9195106
1
115
ROD CLUTCH900208
1
116
SCREW CAP 1/4-20 x 1” LG.
*8041006
2
117
WASHER 1/4” FLAT (5/16 ID x 3/4 OD x 1/16)
*8171002
6
118
GUARD CHAIN ASS’Y TKDSP
890195
1
119
CLIP-CLUTCH CABLE
900999
1
120
PLATE BRACE HT. ADJ. KD / TKD
900756
1
121
CLUTCH DOUBLE RELEASE
900307
1
122
WASHER FENDER 5/16
*8172020
1
123
LABEL READ OWNER'S MANUAL
890301
1
* Denotes
standard
hardware item
that may be
purchased
locally.
standard
hardware item
that may be
purchased
locally.
20
Qty.
Purchased
from
from
Purchase
Date
Date
Engine Service and Warranty
Contact your nearest engine manufacturer's autho-
rized servicing dealer.
22.1
21
Serial Plate
R
ecord your machine model, serial number
and date-of-purchase and where purchased
22
1803 S. Jefferson P.O. Box 308
Lee's Summit, MO 64063 / USA
(816) 524-9666 FAX (816) 524-6983
Lee's Summit, MO 64063 / USA
(816) 524-9666 FAX (816) 524-6983
Model
Serial No.
kg
Engine Power
Unit (weight)
R
lbs
min
-1
kW
@
Operator
BILLY GOAT INDUSTRIES INC.
P.O. BOX 308 (1803 S JEFFERSON) LEE'S SUMMIT, MO 64063 / USA
PHONE: 816-524-9666 FAX: 816-524-6983
P.O. BOX 308 (1803 S JEFFERSON) LEE'S SUMMIT, MO 64063 / USA
PHONE: 816-524-9666 FAX: 816-524-6983
R
97
L
A
L
A
p
109
WARRANTY PROCEDURE
Please fill in the WARRANTY CARD and send the upper part to Billy Goat.
The WARRANTY terms are stated on the lower part which remains with the
user. Whenever a Billy Goat Machine is faulty due to a defect in material
and / or workmanship, the owner should make a warranty claim as follows:
The WARRANTY terms are stated on the lower part which remains with the
user. Whenever a Billy Goat Machine is faulty due to a defect in material
and / or workmanship, the owner should make a warranty claim as follows:
The Machine should be taken to the dealer from whom it was
purchased or to an authorized Billy Goat dealer.
purchased or to an authorized Billy Goat dealer.
The owner should present the remaining half of the Warranty
Registration Card, or, if this is not available, the invoice or receipt.
Registration Card, or, if this is not available, the invoice or receipt.
The Warranty Claim will be filled in by the authorized Billy Goat Dealer,
who will send it with the faulty part to Billy Goat headquarters.
who will send it with the faulty part to Billy Goat headquarters.
The Quality / Service department at Billy Goat headquarters will study
the claim and parts and will notify their conclusions.
the claim and parts and will notify their conclusions.
The decision by the Quality / Service department at Billy Goat
headquarters to approve or reject a Warranty claim is final and
binding.
headquarters to approve or reject a Warranty claim is final and
binding.
Note: To process a Warranty Claim, it is necessary to quote the Model
& Serial number who are printed on the Billy Goat Serial Plate.
& Serial number who are printed on the Billy Goat Serial Plate.