Bil-Jax Personal Lift ESP 19 사용자 설명서

Perform the following procedures to operate the ESP 19 platform lift vehicle. 

1.  Read and follow all safety precautions contained in Section 1 and all responsi-

bilities outlined in the ANSI A92.3 reprint in Section 7 of this manual. 

2.  Check the lift vehicle for damage or worn parts. If damage or part wear is 

found, do not operate the vehicle until the problem is corrected. 

3.  Make sure battery charger cord is disconnected from wall outlet.  Place cord 

back into its box and close and latch lid.  LIFT WILL NOT OPERATE IF 
LID IS NOT CLOSED SECURELY. 

4. Turn 

the 

BATTERY ON/OFF

 switch, Figure 3-3, to the 

ON

 position. 

5.  Observe the battery charge level indicator. Verify that the battery charge level is 

3/4 or more.   

 

6. Turn 

the 

UPPER CONTROL/OFF/LOWER CONTROL

 key switch, Figures 3-1 & 3-3, 

to the 

UPPER CONTROL

 position.  

7.  Enter the platform cage and close the entry gate.  LIFT WILL NOT 

OPERATE IF THE GATE IS NOT CLOSED COMPLETELY. 

8.  Use the upper control box controls to operate the lift vehicle. 

9.  Position the lift vehicle at the work area. Make sure the vehicle is on a firm and 

level surface and that there are no potential hazards such as speed bumps, open 
floor drains, potholes, overhead obstructions or electrically charged conductors. 
Do not operate the lift vehicle if such hazards exist in the immediate area.