Beurer PM90 작동 가이드
45
G
B
B
the distance (meters) in the middle
line during the run.
Please note that the calibration only
applies to the relevant type of pace.
If you change the type of pace, then
this has an effect on the accuracy of
the speed and distance recordings.
line during the run.
Please note that the calibration only
applies to the relevant type of pace.
If you change the type of pace, then
this has an effect on the accuracy of
the speed and distance recordings.
start / stop
End your run. The HR monitor dis-
plays the measured length of the
distance, e.g. 1596 m.
distance, e.g. 1596 m.
If the displayed value is lower
than the distance covered, in-
crease the value with
than the distance covered, in-
crease the value with
menu
.
If the displayed value is higher
than the distance covered, de-
crease the value with
than the distance covered, de-
crease the value with
option / set
.
start / stop
If the calibration was successful
CAL OK
is displayed.
If the distance measured is shorter
than 100 m, i.e. too short for an
accurate calibration, the error mes-
sage
than 100 m, i.e. too short for an
accurate calibration, the error mes-
sage
bad Range
is displayed.
start / stop
CAL Distance
is displayed.
You would like to activate the
automatic lap function. Please re-
fer to page 42 “Set speed unit and
automatic lap function”.
automatic lap function. Please re-
fer to page 42 “Set speed unit and
automatic lap function”.