Manualsbrain.com
  1. 매뉴얼
  2. 브랜드
  3. Benq
  4. Dlp Projector MS504
  5. 사용자 매뉴얼

Benq Dlp Projector MS504 사용자 매뉴얼

다운로드
페이지 중 55
Maintenance
48
Replacing the lamp
Turn the power off and disconnect the projector from the power outlet. Please contact 
service personnel for changing the lamp or visit 
http://www.BenQ.com
.
Resetting the lamp timer
After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM 
SETUP: Advanced > Lamp Settings menu. Press MODE/ENTER. The Lamp 
Settings page appears. Highlight Reset Lamp Timer. A warning message appears asking 
if you want to reset the lamp timer. Highlight Reset and press MODE/ENTER. The lamp 
time will be reset to “0”.
Do not reset if the lamp is not new or replaced as this could cause damage.