Behringer U-Control UCA222 사용자 설명서
9
U-CONTROL UCA222 User Manual
Recording device
Fiber optic cable
RCA Outputs
RCA Input
Computer USB
B3031A
Active Monitor Speakers
HPM1000
V-AMP 3
Recording with a preamp such as the
V-AMP 3:
Preamps such as the V-AMP 3 provide a great way to record a
wide selection of high-quality guitar sounds without the hassle
of placing a mic in front of a conventional amp. They also allow
you to record late at night without tempting your roommates
or neighbors to strangle you with your own guitar cable.
• Plug a guitar into the instrument input of the V-AMP 3
• Plug a guitar into the instrument input of the V-AMP 3
using a standard ¼" instrument cable.
• Connect the stereo ¼" outputs on the V-AMP 3 to the
stereo RCA inputs on the UCA222. This will likely require
adaptors. You may also use the stereo RCA to ¼" TRS cable
that is included in the V-AMP 3/UCA222 package bundle
to connect from the V-AMP 3 headphone output to the
UCA222 RCA inputs.
• Plug the USB cable into a free USB port on your computer.
The POWER LED will light up.
• Adjust the output signal level on the V-AMP 3.
• Set the recording program to record input from the UCA222.
• Press record and wail!
• Set the recording program to record input from the UCA222.
• Press record and wail!