Behringer Digital Mixer X32 사용자 설명서

X32 DIGITAL MIXER Preliminary User Manual

This combination effect merges a user-definable Delay (echo) with a studio-

quality Chorus sure to fatten up even the “skinniest” track. Uses only one FX slot. 

(Inspired by the TC Electronic D-Two)
The TIME knob adjusts the delay time, and the PATTERN knob sets the delay ratio 

for the right channel and negative values activate a cross feedback between 

the two channels. The FEEDHC knob adjusts the delay high-cut frequency, 

while the FEEDBACK knob adjusts the number of repeats. The X-FEED knob allows 

you to send the delay sound to the chorus effect. The BALANCE knob adjusts 

the ratio between delay and chorus. SPEED, DELAY and DEPTH adjust the rate, 

delay, and modulation depth of the chorus. The right channel LFO PHASE can be 

offset by up to 180 degrees, and WAVE adjusts the chorus character by shaping 

the LFO waveform from sine wave to triangular wave. Use the MIX knob to blend 

the effected signal with the “dry” sound. 

This handy dynamic duo blends the “woosh” of soaring jet planes with classic 

Delay, and can be adjusted from mild to wild. This combination effect only takes 

up one FX slot. (Inspired by the TC Electronic D-Two)
The TIME knob adjusts the delay time, and the PATTERN knob sets the delay ratio 

for the right channel and negative values activate a cross feedback between 

the two channels. The FEEDHC knob adjusts the delay high-cut frequency, 

while the FEEDBACK knob adjusts the number of repeats. The X-FEED knob 

allows you to send the delay sound to the flanger effect. The BALANCE knob 

adjusts the ratio between delay and flanger. SPEED, DELAY and DEPTH adjust the 

rate, delay, and modulation depth of the flanger. The right channel LFO PHASE 

can be offset by up to 180 degrees, and FEED (positive and negative amounts) 

adjusts the feedback effect. Use the MIX knob to blend the effected signal with 

the “dry” sound. 

These are standard graphic equalizers that provide 31 bands of adjustment 

between 20 Hz and 20 kHz. A master volume slider compensates for changes in 

volume caused by the equalization. A maximum boost or cut of 15 dB is available  

for each band. 

The TruEQ incorporates a special algorithm that compensates for the gain 

adjustment overlapping effect that adjacent frequency bands have on one 

another. On a standard EQ, when neighboring bands are boosted together, 

the resulting effect is magnified beyond what is visible from the positioning of 

the sliders.  

Graphic equalizer without frequency response correction.

This compensated EQ will produce an adjustment that is identical to the actual 

positioning of the sliders.

Graphic equalizer with frequency response correction.