Bay Technical Associates 350 사용자 설명서
Using the Console Interface
893-00992-B
3-53
Reset
The Reset command allows you to reset the switch without erasing any configured
switch parameters.
switch parameters.
Resetting the switch takes approximately five seconds to complete. During this
time, the switch initiates a self-test that comprises various diagnostic routines and
subtests.
time, the switch initiates a self-test that comprises various diagnostic routines and
subtests.
The results of the self-test are displayed briefly in the BayStack 350 switch
Self-Test screen (Figure 3-26), which is followed by the CI screens.
Self-Test screen (Figure 3-26), which is followed by the CI screens.
Figure 3-26.
Self-Test screen after resetting the switch
The switch LEDs also display various patterns to indicate that the subtests are in
progress.
progress.
Note:
The Self-Test screen remains displayed only if the self-test detects a
fatal error.
BayStack Model 350T Self-Test
ASIC addressing test ... Pass
ASIC buffer RAM test ... Pass
Physical layer test ... Pass
Port internal loopback test ... Pass
Self-test complete.
350fbk.book Page 53 Wednesday, July 9, 1997 4:51 PM