Bay Technical Associates 350 사용자 설명서
Using the Console Interface
893-00992-B
3-11
Choosing a BootP Request Mode
The BootP Request Mode field in the IP Configuration screen allows you to
choose which method the switch uses to broadcast BootP requests:
choose which method the switch uses to broadcast BootP requests:
•
BootP When Needed
•
BootP Always
•
BootP Disabled
•
BootP or Last Address
The following sections describe the BootP request modes.
BootP When Needed
This mode allows the switch to request an IP address if one has not already been
set from the console terminal.
set from the console terminal.
When selected, this mode operates as follows:
•
When the IP data is entered from the console terminal, the data becomes the
in-band address of the switch and BootP requests are not broadcast. The
switch can be managed using this in-band IP address.
in-band address of the switch and BootP requests are not broadcast. The
switch can be managed using this in-band IP address.
•
When the in-band IP address is not set from the console terminal, the switch
broadcasts BootP requests until it receives a BootP reply containing an IP
address. If the switch does not receive a BootP reply that contains an IP
address, the switch cannot be managed in-band.
broadcasts BootP requests until it receives a BootP reply containing an IP
address. If the switch does not receive a BootP reply that contains an IP
address, the switch cannot be managed in-band.
If an IP address is not currently in use, these actions take effect immediately.
If an IP address is currently in use, these actions take effect only after the switch is
reset or power cycled.
reset or power cycled.
350fbk.book Page 11 Wednesday, July 9, 1997 4:51 PM