Buffalo Technology TeraStation TS-RXL 사용자 설명서

TeraStation User Manual

135

System - Power Management

UPS Settings

Click [Modify Settings] 

to change settings.

UPS Status

This is the feature to shutdown the TeraStation automatically when the UPS 

runs by battery due to power outage and such. If the UPS is connected, it shows 

the status of the UPS.

*  This setting must be done after connecting the UPS and the TeraStation with 

a USB cable.

UPS Connection Type

Select a connection method with UPS.

*  [USB Port (APC Style)] or [USB Port (OMRON Style)] can be set only when you 

are using USB type UPS manufactured by APC.

*  The items to select will vary depending on a UPS model number and a cable. 

Refer to BUFFALO’s website (www.buffalotech.com) for details.

Synchronize with UPS

Select [Enable] when using Synchronization with UPS feature.

*   [USB Port (APC Style)] or [USB Port (OMRON Style)] can be set only when you 

are using USB type UPS manufactured by APC.

TeraStation behavior 

When Power failure

Allows you to set the time until shutdown when the power failure continues.

Or, you can set to [Shutdown TeraStation when UPS Reports ‘Battery Low’ 

status.].

*  Shutting down by Battery Low can be used only when UPS for USB 

connection is used.

UPS Behavior After 

TeraStation has shut 

down

Specifies whether shutting down UPS or not after shutting down the 

TeraStation.

UPS Recovery 

function

Reboot the TeraStation Automatically after recovering supply from AC power 

to UPS.

SleepTimer

Click [Modify Settings] 

to change settings.

Timer Interval

Select [Timer Interval] from [Disable], [Everyday], or [Specific day of the week] 

for Sleep Timer. 

If selecting [Specific day of the week], specify the day by tick the box for that 

day.

Timer can be set up to 3 (1-3). 

Wake up at

Specify the restart time which recover from the Standby to the Normal state.

You can set time from 0:00 to 23:45.

Begin Sleep at

Specify the ending time to move from Normal state to Standby State.

You can set time from 0:00 to 27:45.

*  You can not set the ending time before or the same time as a beginning time.