Brunton Bantam 81-100726 전단

2255 Brunton Court, Riverton, WY USA 82501

PH: 307.857.4700

Brunton warrants this product to be free of defects in workmanship and materials for the 

lifetime of the original owner, and is nontransferable.  If you have any problems with your 

Brunton stove, the stove should be returned to the dealer or sent to Brunton, 2255 

Brunton Court, Riverton, WY 82501 U.S.A.  Please contact Brunton at the number below 

to obtain RA#.  Clean food and soot from stove before shipping. Shipping cost to Brunton 

is the responsibility of the purchaser. Return postage will be paid by Brunton. Please 

return this warranty card to Brunton as a proof of purchase.  This warranty does not cover 

damage caused by accident, misuse, abuse, or tampering. A nominal charge will be 

assessed to repair such damage.

Brunton assumes no responsibility for any inconvenience, loss, or injury, direct or 

consequential damage arising from possession or use of the goods. This warranty gives 

you specific legal rights which may vary from state to state. Check with your local state 

about your rights.

TM

Please read, understand and follow all instructions and warnings before using this 

product. The proper fuel bottle for this product is included.

ATTN: WARRANTY DEPT.
2255 BRUNTON COURT
RIVERTON, WYOMING 82501
307.857.4700

BRUNTON WARRANTY REGISTRATION

NAME_______________________________________________________
ADDRESS___________________________________________________
CITY_________________________ST/PROV_______ZIP__________
PHONE _______________________EMAIL_______________________
MODEL#__________________DATE PURCHASED____________
PURCHASED FROM_______________________________________
CITY_________________________ST/PROV_______ZIP__________
PRICE PAID $___________________                                                  

1006

VISIT OUR WEBSITE AT www.brunton.com

Warranty card must be filled out completely and returned within 30 days with proof of purchase for warranty to be valid.

1. Pour the fuel up to the fill line on the bottle. Do not overfill.

2. Insert pump and turn clockwise to tighten.

To avoid the possibility of serious injury, use only a Brunton pump and bottle. 
Use only White Gasoline, other fuel could clog the nozzle and may cause a fire hazard.
Keep away from children.

Using the stove on uneven surface is very dangerous and may cause a fire hazard

and serious injury.
When the fuel bottle has been connected to the pump be sure that the valve knob is set 

to the OFF position.
When the stove is in use, keep fuel bottle as far away as possible.

- Before using the stove with white gas, it is necessary to pre-heat the fuel. This is called 

priming the stove.

1. Turn the valve knob counter clockwise to the (ON) position and wait 1-2 seconds until the 

jet emits a small amount of fuel onto the priming pad then close the valve  by rotating the knob 

counter clockwise to the (OFF) Position. If fuel does not flow, the fuel bottle is low on 

gas and the bottle may need preasurizing or more fuel.

2. After connecting the flexible hose to 

the pump, ensure that the fuel bottle is 

placed on a flat surface.

1. Unfold the stove legs and place the stove on a flat surface.

2. After the fire extinguishes, the stove will remain hot, wait until the stove cools down.

3. Separate the stove from pump.

4. Fuel bottle and pump can be transported as a connected assembl

y

y. When separating the

    pump from fuel bottle, turn the pump slowly so that the pressure retained inside the fuel 

    bottle can release gradually.

1. To extinguish the stove, turn the valve knob to the OFF position and flip the bottle over. 

NOTE: The stove will continue to burn for a short time until all of the fuel in the generator tube 

and fuel hose is consumed.

Turn slowly counter-

clockwise after preheating

Flip

Small flame remains for 2-3 

minutes consuming all the fuel in 

the hose.

Dried or torn parts need to be replaced. Check the color and size and any printed 

markings and contact your nearest Brunton stock list or retailer for replacements.

(Oil seals, Oil, Nozzle, Tool kit)

- Colgging inside the nozzle or generator tube may disturb the fuel and create poor stove

  performance.

- Remove clogging inside the nozzle hole with a nozzle pin.

- If clogging persists inside of the nozzle or generator tube, a more thorough cleaning 

  is required.

          A) How to clean with nozzle pin

               1. Turn off the stove valve and wait until the stove has completely 

                   cooled down.

               2. Remove the Jet by disassembling and removing the generator tube 

                   assembly from the stove with the tool kit.

               3. Clean the jet with the nozzle pin

               4. Re-Assemble the stove and check for any fuel leaks.

- If cleaning the Jet does not improve the stove efficiency, clean the generator tube as well.

          B) How to clean the generator tube

               1. Begin by removing the generator tube assembly from the stove with 

                   the tool kit.

               2. Pull the wire out brush clean of any debris and replace

               3 . Re-Assemble the stove and check for any fuel leaks

 leg A
o-ring

 leg B

leg pin

fill line

20-30 times

 head

 oil plate

 leg B

guide spring

guide

nozzle

connect nut

nozzle

connect bolt

o-rings

pump knob

hose cap

hose

nozzle

connect

nozzle

body nut

hose washer

heating pipe  

bolt

nozzle

filter
heating pipe

nozzle body

valve

connect

valve connect bolt

pipe bushing

pipe bolt

 venturi

wave washer

 ring

 pump knob

 pipe bolt

 pipe bushing

 guide spring

guide

 packing washer

guide washer

packing holder

packing rubber

connect bushing

head assembly

housing cap

nylon hose

filter

 setting bushing

 spindle

setting bolt

 knob

o-rings

 pipe

 o-rings

 o-ring

 air spring

 air bolt

air bushing

 air bushing body

housing

3. Before pumping pressure into the fuel 

bottle, ensure that the control valve for the 

stove unit is set to the OFF position. Pump 

the handle on the pump set to pressurize 

the fuel bottle (20 strokes).

NOTE: Less fuel in the bottle needs more 

pumping strokes to pressurize the bottle.

1-2 seconds

Manual ignition

Preheating

Working

Before igniting the stove, ensure that the valve knob is turned to 

the clockwise (OFF) position.
Never place your head or body above the stove when lighting it.

 After fuel has been primed to the stove, ignite the fuel through the ignition port with a 

lighter or a match to preheat the generator pipe.

 After pre-heating (1-2minutes) slowly open the valve to allow fuel to flow through the 

generator unit. The flame may appear yellow for the first minute of operation but should 

settle to a crisp blue flame that is the normal cooking flame. If an excessively high yellow 

flame is evident, turn off the stove and repeat the preheating process.

 Never allow fuel to overflow from the stove base, as leaking fuel will ignite and may 

cause a fire hazard and serious injury.

 If the flame decreases in intensity, further pressurization of the fuel bottle is required.

Hissing

Separation

Inner pressure exclusion

After disassembling and assembling, be sure to check for leakage with soapy water. 

Only use in well ventilated areas.
Do not leave unattended while in use.

Keep well away from children.
Do not operate near flammable materials.