Brother Z-8550A 사용자 매뉴얼

Z-8550A, 8560A

4. USING CF CARDS

4-8. Updating the control program version

4-8-1. Control program version updating procedure

Carry out steps 1 to 3 in “4-3. Preparation for reading/writing data”.

Select [r 7] in CF data read/write mode.

Version number for control program saved on CF card

Version updating in progress Complete when [End] is displayed

NOTE:
* Version updating takes a maximum of 60 seconds. (The time taken will vary depending on the manufacturer and

storage capacity of the CF card being used.)

* Never remove the CF card or turn off the power switch while reading of the CF card is in progress.
* If the filename and folder name for the control program are incorrect, error [Err 421] will be displayed.

Set the power switch (1) to OFF and remove the CF card.

0206B

0208B

0207B

0197B

0196B