Brother Z-8550A 사용자 매뉴얼

 

 

Z-8550A, 8560A

 

10. APPLYING GREASE (When “GrEASEUP” appears)

87 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 

 

 

 

 

 

 

 

After applying grease in the places indicated by arrows [A] to [G] above, carry out the reset operation described below. 

 

After the grease has been applied, carry out the following 
procedure to reset the cumulative time between grease 
applications. 

1. Turn the power switch to “ON”. “GrEASEUP” will flash in 

the main display (1) and the buzzer will sound. 

2.  Press the RESET key (2). The main display (1) will switch 

to zigzag width/zigzag base line position display mode. 

3. Press and hold the LOCK key (4) for 2 seconds or 

more.The lock icon (5) will switch off and the lock will be 
released. 

4. Press the FUNC (Function) key (6). “n.134 xxx” will 

appear in green in the main display (1). 
(xxx represents the time between grease applications.) 

5.  Press the rightmost key (7). The “ 

  ” will change to “0”. 

6. Press and hold the ENTER key (8) for two seconds or 

more. 
A long beep will sound and the main display (1) will 
switch to zigzag width/zigzag base line position display 
mode. 

7. Depress the treadle to run the sewing machine for 1 

second or more. 

8. Turn the power switch to “OFF”. (This completes the 

reset procedure.) 

 

3489M

Use the tip of a long brush or similar to
apply approx 1g of grease to the places
indicated by arrows [E] to [G]. 

3488M

2. Apply approx 1g 

of grease. 

 

1. Pull the needle bar (3) 

forward with your finger.

3. Turn the machine pulley to gently

apply the grease onto the felt. 

4.  Move the needle bar (3) back and

forth with your finger to spread
the grease. 

After applying approximately 1g of grease to 
the groove, move the needle bar (3) back and 
forth with your finger to spread the grease. 

Felt