Boss Audio Systems GT-100 사용자 설명서

Using the GT-100 Connected to a Computer Via USB

With the GT-100, you can use USB to transmit both digital audio 

signals between the GT-100 and your computer.

Just by connecting the GT-100 to your PC/Mac with a USB cable, 

audio signal can be transferred bidirectionally via USB.

By using the specialized driver, you can record, play back, and edit 

audio with high-quality sound and stable timing (p. 47).
You can download the special GT-100 driver from the Roland local 

website.
You must install the dedicated driver before you make USB 

connections.
The program and procedures for installing the driver vary according 

to the operating environment; carefully read the Readme included 

in the downloaded file.

A USB driver is software that acts as a go-between 

in transferring data between computer applications 

(such as recording software and sequencer software) 

and the USB device when the computer and USB 

device are connected using a USB cable.
The USB driver transmits data from the applications 

to the USB device, and conversely, passes messages 

from the USB device to the applications.

If you connect the GT-100 to your PC/Mac by a USB cable, you can 

transfer MIDI message bidirectionally via USB. Set the GT-100’s “MIDI 

IN SELECT” (p. 45) to “USB (Auto).” On your computer, set the MIDI 

input/output ports to “GT-100.”
However, MIDI message transfer via GT-100’s MIDI connectors 

become inactivated in this situation.

For more on MIDI-related settings, refer to “MIDI-Related 

Make connections as shown in the illustration below.

Bulk data transmitted from MIDI sequencer software can be 

received by the GT-100 to restore its settings. 
Set the GT-100’s Device ID to the same number that was used when 

the data was transmitted to the MIDI sequencer (p. 44).

*  For instructions on operating the sequencer, refer to the owner’s 

manual for the sequencer you are using.

•  When data is being received, the message “BULK DATA 

RECEIVING...” appears on the display.

•  Keep the power on while the bulk data is being received.
•  If the message “MIDI BUFFER FULL” appears, check the 

connections and reduce the tempo of the transmitting MIDI 

device.

The GT-100’s sound can be recorded on a computer, and sound 

from the computer can be played through the GT-100. You can 

change the audio signal flow to suit your purpose.

•  For more about USB settings, refer to “USB-Related Settings” (p. 

•  For details on how to switch the audio input on the computer 

software, refer to the manual for the software you’re using.