Bosch Appliances Microphone PLE-2CS 사용자 설명서

다운로드
페이지 18
Bosch Security Systems | 2008-01 | PLE-2CS en
Plena Two-zone Call Station | Installation and User Instructions | Connections
 en | 11
4
Connections and settings
4.1 
Connecting multiple call 
stations
When the configuration requires more than one call 
station, use the loop-through RJ-45 sockets on the call 
stations to make loop-throughs.
4.2 Configuration 
settings
Use the DIP switches at the bottom of the call station to 
set the chime, the momentary or latching speaking 
function, the speech filter and the microphone gain. See 
figure 4.2.
4.2.1
Chime settings
See figure 4.2. DIP switches number 1, 2 and 3 are used 
for setting the chime. 
1 = ON-position, 0 = OFF-position.
4.2.2
Momentary or latching speaking 
setting
See figure 4.2. DIP switch number 4 is used for setting 
the momentary or latching speaking function. 
1 = latching, 0 = momentary.
4.2.3
Speech filter setting
See figure 4.2. DIP switch number 5 is used for setting 
the speech filter ON (1) of OFF (0).
Note
In such a daisy chain configuration the priority 
is automatic; the call station nearest to the mixer 
has priority and can override the call station 
further away from the mixer. Call station 
number 2 has priority over call station 
number 3, etc. See figure 4.1.
figure 4.1: Connecting multiple call stations
Plen
a
Plen
a
Plen
a
Ple
na
Plena
Plena
table 4.1: Chime settings
DIP switch setting 
(1-2-3)   
Description
0-0-0
no chime
0-0-1
1-tone chime
0-1-0
2-tone chime
0-1-1
2-tone chime reversed
1-0-1
3-tone chime A
1-0-0
3-tone chime reversed B
1-1-0
4-tone chime A
1-1-1
4-tone chime C