Blomberg TROCKNER TKF 7330 A 사용자 설명서

14 - EN

explained in the section “Maintenance

and Cleaning”.

With the “Time delay” function you can

delay the program start up to 19 hours.

1.  Open the loading door and put the

laundry in.

2.  Select the drying program and select 

the auxiliary functions if required.

3.  Press the “Time delay” buttons to

adjust the desired time.

4.  Press “Start/Pause/Cancel” button.

The time delay function will start to 

countdown.

C

  Additional laundry may be loaded 

during the time delay period.

5.  At the end of countdown process, 

“:” will light up continuously and the

relevant program follow-up light will 

light up according to the selected 

program.

C

  During drying process, the display 

shows the estimated time remaining 

for the program to finish. The 

estimated time displayed on the 

screen at the beginning of the drying 

process has been calculated on the 

basis of an 800 rpm spin speed rate 

to dry a maximum load capacity in 

the washing machine. 

C

  If the loaded laundry amount is less 

than the calculated laundry amount 

or if drying has been performed at 

higher spin speed, the remaining 

time may be less than the time that 

appears on the display.

C

  Incase the laundry is spun at a lower 

spin rate than the calculated one and 

if “Filter Cleaning” or “Condenser

Cleaning” processes are not carried 

out, the remaining time may be longer 

than the time shown on the display.

C

  Dryness level of the laundry is 

Your machine will send out an audio

warning when the program comes to 

an end. If you do not want to hear this 

buzzing, you need to press the “Cancel

Audio Warning” button.  The relevant LED 

will light up when this button is pressed 

and an audio warning will not be given 

when the program comes to an end.

C

 You can select this function either

before or after the program starts.

C

 Warning indicators may differ 

according to the model of your 

machine.

A warning LED will light up when timer is 

programmed.

A warning LED will light up as long as the 

child-proof lock remains activated.

A warning LED will light up to remind filter 

cleaning after the program finishes.

C

  If the filter cleaning warning lights 

up continuously, please refer to, 

“Solution suggestions for problems”.

A warning LED will light up at the end 

of the program or when the tank is full 

with water. The machine stops operating 

when this warning LED lights up during a 

program running.  To enable the machine 

restart, drain the water in the water tank. 

Press "Start/Pause/Cancel" button to

start the program after you have emptied 

the water tank. The warning LED goes off 

and the program resumes operating.

It will light up periodically after maximum 

5 drying cycles for the purpose of 

reminding.

In this case and after drying, clean as