Blomberg TROCKNER TKF 7330 A 사용자 설명서

20 - EN

Problem

Cause

Explanation / Suggestion

Drying process 

takes too much 

time. 

 Cover filter and filter drawer might 

have not been cleaned.

* Clean the cover filter and Filter drawer.

Laundry come 

out wet at the 

end of drying.

* Cover filter and filter drawer might 

have not been cleaned.

* Excessive laundry might have been 

loaded in.

* Clean the cover filter and Filter drawer.

* Do not overload the machine.

Machine does

not switch on 

or the program 

does not start. 

Machine is not

activated when 

set.

* It might have not been plugged in.

* The loading door may be ajar.

* Program might have not been set

or the "Start/Pause/Cancel" button

might have not been pressed.

* "Childproof lock" might have been 

activated.

* Make sure that the machine is plugged in.

* Make sure that the loading door is properly

closed.

* Make sure that the program has been set and it

is not in “Stop” mode.

* Deactivate the childproof lock.

Program has

been interrupted 

without any 

cause.

* The loading door may be ajar.

* Electricity may be cut off.

* Make sure that the loading door is properly

closed.

* Press the "Start/Pause/Cancel" button to start

the program.

Laundry has 

shrunk, become 

felted or 

deteriorated.

* A program suitable for the laundry 

type might have not been used.

* Dry only the laundry which is suitable for drying 

in your machine after checking the labels on your 

clothes.

* Select a program with suitable temperature for 

the laundry type to dry your clothes.

Drum lightning 

does not come 

on.

(for models 

equipped with a 

lamp)

* The machine might have not been 

started by using the On/Off button.

* Bulb may have blown.

* Make sure that the machine is On.

* Call the authorized service to replace the bulb.

“Final / Anti-

creasing” light 

flashes.

* The 2-hour anti creasing program 

to prevent laundry from creasing 

might have been activated.

* Turn off the machine and take out the laundry.

“Final / Anti-

creasing” light 

is on.

* Program has come to an end.

* Turn off the machine and take out the laundry.

The “Drying” light

flashes.

* A heat sensor failure has occurred. 

Machine ends the program without

heating.

* Turn off the machine and take out the laundry. 

Call your authorized service.

Also, for products equipped with a “Condenser” and a “Heat pump”
“Tank full”

warning light is 

on.

* Water may be full.

* Anti-creasing program might be 

running.

* Drain the water in the water tank.

“Filter cleaning”

light is on.

* Filter might have not been cleaned. * Clean the cover filter.

“Condenser

cleaning” light 

is on.

* Filter drawer/Condenser might 

have not been cleaned.

* Clean the filters in the condenser/filter drawer 

under the kick plate.

A

 Call an authorized service if the problem persists.