Blomberg TROCKNER TKF 7330 A 사용자 설명서

6 - EN

operates more silently and vibration-free, 

it must stand level and balanced on its 

feet.  Balance the machine by adjusting 

the feet.

Rotate the feet to adjust until the machine 

stands level and firmly.

C  Never unscrew the adjustable feet 

from their housings.

Ventilation hose assures exhausting of 

the air from inside the machine.

There are 3 air outlets on the rear, left 

and right sides of a vented dryer. The 

sides are covered by a replaceable plastic 

cover.

Stainless sheet metal or aluminum pipes 

can be used instead of the hose. The 

diameter of the pipe to be used should 

be minimum 10 cm.

Maximum hose and pipe lengths are

given in the table below.

Hose

Pipe

Maximum length

8 m

10 m

1 elbow 45°

-1.0 m

-0.3 m

1 elbow 90°

-1.8 m

-0.6 m

1 elbow 90° short

-2.7 m

1 wall passage

-2.0 m

-2.0 m

C  Each elbow and other passages 

should be subtracted from the above 

maximum length.

To connect a ventilation hose;

1.  Fit the hose adaptor (90° or flat 

adaptor) by pressing it on the air 

outlet at the rear of your machine. 

Close the remaining 2 air outlets with 

•  Install your machine in environments

which have no risk of freezing and in 

a stable and level position.

•  Do not place your machine on a long

pile rug or on similar surfaces.

•  Operate your machine in a well

ventilated, dust-free environment.

•  Do not block the air ducts in front of

and under the machine with materials 

such as long pile rugs and wooden 

bands.

B  Make sure that your machine is not

placed on the power cable.

B  Keep at least 1. 5 cm from the edges

of other furniture.

•  A special part (Part no

295 950 

0100) replacing the top trim must 

be provided and installed by the 

Authorized Service in order to use 

the machine under a counter or 

in a cupboard.  It should never be 

operated without the top trim.

•  Leave at least 3 cm of space

between the side and rear walls of 

the machine and the walls of the 

counter/cupboard when installing 

your machine under a counter or in a 

cupboard.

•  A fitting device should be used

between the two machines for use on 

a washing machine. The fitting device 

(Part no. 295 560 0100 white/ 295

560 0200 grey) must be installed by 

the Authorized Service.

•  Place the machine on a sound floor. If

it is to be placed on top of a washing 

machine, the approximate weight 

together may reach 180 kg when 

they are full.  Therefore, the floor must 

be capable of carrying the load on it!

In order to ensure that your machine