Bizfon 2000 사용자 설명서

Bizfon Manual I: Installation Guide 

Step 1: Installing the Bizfon 

 

 The Admin PC is connected to the Bizfon LAN port to access the Web Man-

agement of the Bizfon. After the initial configuration has been completed, this PC can then 
be moved to the LAN and connect to the Bizfon over a switch (see Fig.I-7). You also may 
reach the Bizfon for its first configuration from an Admin PC within the LAN, but this may 
cause collisions in case of non-fitting IP addresses and competing DHCP servers. 

 

Fig. I-5: Configuration: Bizfon used as Internet Access Router with a switch connected to the LAN port 

If the user already operates a router connected to the cable or DSL modem and has de-
vices behind the router, the router is disconnected from the modem and the Bizfon is in-
serted between the modem and the router (see Fig.I-8). The Bizfon serves as an Internet 
access router and DHCP server. The Bizfon will be configured to connect directly to the 
Internet through a cable or DSL modem. The router then is connected to the Bizfon LAN 
port.  

 

Fig. I-6: Configuration: Bizfon used as Internet Access Router with a router connected to the LAN port 

 If there are services configured behind the existing router such as Web or 

gaming servers, these services also must be configured through the Bizfon firewall for 
proper operation. Refer to the Administrator’s Guide for more information.  

 

Bizfon2000 and Bizfon4000 (SW Version 3.1.x)

 

12