Bang & Olufsen BeoCom Beocom 6000 사용자 설명서

Get started 

If the handset requires charging, this occurs automatically when 
the handset is placed in the charger. For safety reasons, the 
battery is not charged prior to shipping. We recommend that you 
charge the handset for at least one hour before proceeding 
further with first-time registration of the handset. 

–  The charger must be connected to the power outlet. 
–  It takes four hours to fully charge the battery. 
–  The maximum talk­time per charge is approximately 15 hours. 
–  Standby time per charge is approximately 200 hours. 

The battery indicator in the display shows the charge level of the 

handset battery. If the batteries require charging, you are alerted 
by a message in the display and a sound signal. 

Press while the handset is in standby 

Turn the wheel until Battery status is shown and 

press OK. The current charge level appears in 

the display 

When getting started, follow this 

procedure:

1  Connect the charger to the 

power outlet as described in the 
charger’s Guide 

2  Charge the handset battery 
3  Connect the BeoLine base as 

described in the BeoLine Guide 

4  Register the handset to the base. 

The handset controls the battery 

charging, so you can always place 

the handset in the charger after 

use, even if the battery does not 
need recharging. Leaving the 
handset in the charger does not 
reduce the lifetime of the battery. 

Battery status

                         

Battery status

     = = = = = = = = =

           ======

                   ===

6